메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Jeongmin Cho (Hongik University) Tae Heung Lim (Ulsan National Institute of Science and Technology) Youngwan Kim (LIG Nex1) Hosung Choo (Hongik University)
저널정보
한국전자파학회JEES Journal of Electromagnetic Engineering And Science Journal of Electromagnetic Engineering And Science Vol.22 No.6
발행연도
2022.11
수록면
631 - 637 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper proposes a wideband printed patch dipole antenna with a simple on-board feeding network. The proposed antenna is composed of two dipole radiators, a transmission line, and an on-board feeding network with a chip balun. The dipole radiators are printed on a substrate, and the edges of the radiators are truncated to create a hexagonal shape with wide impedance-matching characteristics. The chip balun is embedded in an RO4003C printed circuit board (PCB) to excite differential feeding to each radiator with a 180° phase difference. The proposed antenna is optimized using a CST Studio full electromagnetic software tool, and it is fabricated and measured in an anechoic chamber. The measured fractional bandwidth for the reflection coefficient below –10 dB is 79.5%, and the proposed antenna has a measured gain of 7.1 dBi at 3.5 GHz.

목차

Abstract
I. INTRODUCTION
II. PROPOSED ANTENNA DESIGN AND MEASUREMENT
III. ANALYSIS
IV. CONCLUSION
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0