메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김동호 (한국기계연구원) 정융 (한국기계연구원) 류진우 (한국기계연구원) 이공훈 (한국기계연구원)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제34권 제12호
발행연도
2022.12
수록면
586 - 594 (9page)
DOI
10.6110/KJACR.2022.34.12.586

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
In this study, the performance characteristics of each model according to the flow rate of the low-temperature cooling water heat source of the hybrid chiller combined with the adsorption chiller and vapor compression refrigeration were confirmed. The system performance characteristics included condensation and evaporation capacity and coefficient of performance with the changes of compressor and heat exchanger. It was confirmed that as the cooling water flow rate of the low-temperature condenser increased, the condenser capacity increased with the decrease of the condensation saturation temperature and the degree of subcooling increased. It was also confirmed that the cooling capacity increased as the inlet quality of evaporator decreased due to the increased cooling capacity along with the increase in cooling water flow rate of the low-temperature condenser. The direct correlation with the condensation saturation temperature was confirmed according to the load ratio of the low-temperature condenser, and the performance characteristics of the compression refrigeration system were confirmed according to the change of specific equipment. Finally, a cooling capacity of 20 RT class (70 kW) with a COP of 5.0 was confirmed.

목차

Abstract
1. 서론
2. 실험 장치 및 실험 조건
3. 시험 결과 및 분석
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0