메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
함정균 (조선대학교) 이공희 (한국원자력안전기술원) 오동욱 (조선대학교) 조홍현 (조선대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2021년도 동계학술발표대회 논문집
발행연도
2021.11
수록면
717 - 720 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Numerical analysis was performed to investigate the flow rate non-uniformity of a large plate heat exchanger. As a result of the analysis, the flow rate was lower than the average flow rate near the point where the pipe and the plate heat exchanger were connected (Dimensionless channel location = 0). When the number of channels was 20 EA and 60 EA, it was confirmed that its flow rate was 5.2% and 15.1% lower than the average flow rate. When the number of channels was 20 EA, there was a difference within ±1% from the average flow from dimensionless channel location = 0.25 or more. However, when the number of channels was 60 EA, the maximum overflow occurred at 3.3% higher than the average at Dimensionless channel location = 0.25 or more. As the number of channels increased from 20 EA to 60 EA, the flow inflow was poor, and the non-uniformity increased from 0.0159 to 0.0422.

목차

Abstract
1. 서론
2. 해석 방법
3. 해석 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0