메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이상섭 (한국건설기술연구원)
저널정보
대한건축학회 대한건축학회논문집 大韓建築學會論文集 第38卷 第6號(通卷 第404號)
발행연도
2022.6
수록면
221 - 228 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study aims to develop the precast concrete (PC) beam-to-column joint in a 3-story building where A-type PC column is used. A-type PC column was developed to replace a pre-engineered building system suitable for warehouses and factories. To create a spacious interior, a 3-story PC structure with a central span of approximately 10m was analyzed; the beam members and the column members were designed based on design codes. Then, two types of PC beam-column joints with mechanical anchors, often called headed bars, were developed. These joints could be constructed easily and rapidly using mechanical anchors; connecting plates made of SM45C and high strength bolts for splicing longitudinal rebars were placed inside the U-shell beam. Although the proposed PC beam-column joints exhibited a similar strength to the monolithic joint, it also showed the failure mode of weak column-strong beam, a common structural behavior in small buildings. Particularly, the PC joint using high tension bolts were determined for special moment frames according to ACI 374.1-05.

목차

Abstract
1. 서론
2. A형 PC 기둥의 라멘구조 설계와 접합부 개발
3. 실험
4. 실험 결과
5. 결론
REFERENCES

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-540-001328284