메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김준호 (대한케미컬) 김희주 (한양대학교) 이성범 (한양대학교) 최창규 (한양대학교) 김문일 (한양대학교)
저널정보
한국폐기물자원순환학회 한국폐기물자원순환학회지 한국폐기물자원순환학회지 제25권 제1호
발행연도
2008.1
수록면
58 - 65 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Paint is widely used on industry with the object of target's surface protection and aesthetics. However, outdated paints are wasted due to the development of updated products for the new trend of colors and quality. Solvent which is one of the paint ingredients can be easily collected by the methods of heating or centrifuging, the recovered solvent is reutilized as a cleaning solvent or low class fuel. On the contrary, it is much difficult to separate a paint resin, pigment and additives, and recycling is limited. This study is to compare heating recovery with centrifugal method for collecting solvent from the paint which wasted in a paint production company for an automobile. In the experiment of heating recovery, it showed that solvent recovery rate was about 90%, however, it had a problem that a paint resin was hardened by heating. On a centrifugal method, solvent recovery rate was 80% and it presented less recovery efficiency than heating method, and there was a characteristic that solvent was collected in a short time. In the result of FT-IR (Fourier Transform Infrared Spectroscopy) analyzing of extracted resin after solvent recovery, we found that it coincided with the inherent peak of acrylic resin, hence, an adhesive was made by mixing a epoxy adhesive with a acrylic resin. The tension and T-peel strength of the adhesive contained 25% of acrylic resin were 182 kgf/cm² and 14.3 kgf/cm², respectively, it found that a bonding strength was more increased than that as there was no acrylic resin. As a result of a risk assessment in worksite, due to the difficulty of entire recovery for a solvent, MEK (Methyl Ethyl Ketone) was 2.3 ppm, it showed much little concentration comparing with 200 ppm which is exposure standard of hazardous substances in working.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0