메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
심규현 (경북대학교 건설방재공학부 건설환경전공) 이응섭 (경북대학교 건설방재공학부 건설환경전공) 최정우 (경북대학교) 최윤영 (경북대학교)
저널정보
한국수처리학회 한국수처리학회지 한국수처리학회지 제23권 제5호
발행연도
2015.1
수록면
99 - 110 (12page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
This study was purposed to validate the capability of the TELEMAC model for simulating bended flow of natural rivers. A laboratory hydrodynamic test was done with an open channel with 30o, 60o, and 90o bended sections, and the measured hydrodynamic data were compared with the simulation data of the TELEMAC model. The measured and simulation data (i.e. flow velocity and water depth) in the straight sections of the channel were similar to each other, without variation along the cross-section, because the straight sections were not under the centrifugal force. However, in the bended sections, under the centrifugal force, the measured and simulation data showed that water depth increased but flow velocity decreased from the inner to the outer bend. For both of the straight and bended sections, the errors between the measured and simulation data were less than 7 % error. Therefore, we concluded that the TELEMAC model can properly simulate hydrodynamics in the bended channel, and it can be a good hydrodynamic simulation program for planning, designing, and early warning of bended natural rivers.

목차

등록된 정보가 없습니다.

참고문헌 (14)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0