개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 832 - 841 (10page)
이용수
초록· 키워드
오류제보하기
High temperature deformation behavior of the 7075 aluminum alloy sheets fabricated by twin roll casting and rolling was investigated by hot tensile tests at different temperatures from 350 to 500 °C and various initial strain rates from 1×10-3 to 1×10-2 s-1. The results show that flow stress increased with increasing initial strain rate and decreasing deformation temperature. A large elongation of 200% was obtained at relatively high strain rate of 5×10-3 s-1 at 450 °C. It is closely related with the grain boundary sliding at elevated temperature attributed to the recrystallized fine grains and the large volume fraction of high-angle grain boundaries. The fracture transformation mechanism changes from ductile transgranular fracture to ductile intergranular fracture due to the recrystallized fine grains at high temperature. High density and uniform cavities observed in large elongation samples at high temperature reveals the contribution of grain boundary sliding. Necking-controlled failure mode was characterized by rare cavities with low elongation.
목차
등록된 정보가 없습니다.
참고문헌 (33)
참고문헌 신청
Xu Chen / 2013 / Transition of Crack Propagation from a Transgranular to an Intergranular Path in an Overaged Al-Zn-Mg-Cu Alloy During Cyclic Loading / Metals and Materials International 19(2):197~203
A. Heinz / 2000 / Mater. Sci. Eng. A 280:102
J. C. Williams / 2003 / Acta Mater 51:5775
N. P. Jin / 2009 / Mater. Charact 60:530
Jae-Hyung Cho / 2014 / Microstructure and Mechanical Properties of Al-Si-Mg Alloys Fabricated by Twin Roll Casting and Subsequent Symmetric and Asymmetric Rolling / Metals and Materials International 20(4):647~652
A. Heinz / 2000 / Mater. Sci. Eng. A 280:102
J. C. Williams / 2003 / Acta Mater 51:5775
N. P. Jin / 2009 / Mater. Charact 60:530
Jae-Hyung Cho / 2014 / Microstructure and Mechanical Properties of Al-Si-Mg Alloys Fabricated by Twin Roll Casting and Subsequent Symmetric and Asymmetric Rolling / Metals and Materials International 20(4):647~652
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
High Temperature Deformation Behavior of Spray-Formed and Subsequently Extruded Al-25Si Based alloy
Metals and Materials International
2016 .01
-
Nucleation Mechanism of Discontinuous Dynamic Recrystallization with Restrained Grain Boundary Sliding
Metals and Materials International
2021 .12
-
Effects of Mg and Cu Additions on Superplastic Behavior in MA Aluminum Alloys
한국재료학회지
2018 .01
-
Hot Deformation Characterization of Pure Aluminum Using artificial neural network (ANN) and Processing Map Considering Initial Grain Size
Metals and Materials International
2021 .12
-
Effects of Grain Boundary on {100} Recrystallization Texture of High Silicon Electrical Steel
Metals and Materials International
2018 .01
-
Deformation Mechanisms and Evolution of Second Phase Particles of Mg?Y?Nd?Gd?Zr Alloy During Plane Strain Compression
Metals and Materials International
2021 .11
-
Effect of Initial Grain Size on the Dynamic Recrystallization of Hot Deformation for 3003 Aluminum Alloy
Metals and Materials International
2018 .01
-
7075 알루미늄 합금 판재의 변형률 속도에 따른 고온 인장 파손 거동
대한기계학회 논문집 A권
2021 .02
-
Insight into the Dynamic Recrystallization Behavior and Microstructure Evolution of MP159 Superalloy During Hot Deformation
Metals and Materials International
2022 .10
-
7천계 알루미늄 판재의 고온에서 변형율 속도에 따른 파단 변형율
대한기계학회 춘추학술대회
2020 .07
-
Bimodal-Structured Al?Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature
Metals and Materials International
2021 .12
-
Grain size effect on tensile and wire drawing behaviors in twinning-induced plasticity steel
대한기계학회 춘추학술대회
2021 .11
-
Effects of Warm Rolling Deformation on the Microstructure and Ductility of Large 2219 Al–Cu Alloy Rings
Metals and Materials International
2020 .01
-
Development of Grain Boundary Character Distribution in Medium‑Strained 316L Stainless Steel During Annealing
Metals and Materials International
2019 .01
-
오스테나이트계 Fe-18Cr-10Mn-N-C 합금의 연성-취성 천이 거동에 미치는 결정립 크기의 영향
한국재료학회지
2015 .01
-
Grain Morphology and Orientation Effect on the High‑Temperature Tensile Behavior of Directionally Solidified Magnesium Alloy
Metals and Materials International
2020 .01
-
Effect of Pre-Precipitation on Microstructure and Mechanical Properties of Extruded Mg-Sn-Zn Alloys
Metals and Materials International
2015 .01
-
AA 2014 알루미늄 합금의 고상율에 따른 미세조직 및 반응고 변형 거동
한국주조공학회지 (주조)
2017 .01
-
Characterization of Hot Deformation Behavior and Processing Map of As?Cast H13 Hot Work Die Steel
Metals and Materials International
2021 .09
-
Uncovering Microstructure Evolution and Dynamic Softening Mechanism of Spray-Deposited AlZnMgCu Alloy Under Thermal Deformation
Metals and Materials International
2022 .09
이 논문의 저자 정보
최근 본 자료
댓글(0)
0