메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In order to evaluate the hot flow behaviour of AZ80 magnesium alloy containing 0.5 wt% rare earth elements,isothermal hot compression tests were conducted at the temperatures range of 250-450 °C under the strainrates of 0.001-1 s1. The flow curves exhibited a peak stress at a small applied strain after which the flowstresses decrease gradually to a steady state flow stress at higher applied strain values representing theoccurrence of dynamic recrystallization. Moreover, the material constants in the Zener-Hollomon constitutiveequation were found to be strain dependent, and the relationships between these parameters and theapplied true strain were well described by fourth-degree polynomial functions. Accordingly, a strain-dependentmodel was developed in order to predict the hot flow behaviour of AZ80+0.5RE magnesium alloy. The truestresses predicted by this model were found to be in good agreements with the experimental results. Furthermore,the constitutive model developed using the experimental results was incorporated in the finiteelement model with which the hot compressive flow curve of the investigated material was modeled. Theresults showed that the accuracy of flow curves calculated by the numerical simulations depends on theaccuracy of the developed model.

목차

등록된 정보가 없습니다.

참고문헌 (31)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0