메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.18 No.6
발행연도
2012.1
수록면
1,023 - 1,027 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Recently, laser texturing has received lots of attention for improving the tribological performance of various surfaces, and this laser texturing of surfaces could be applied to improve the tribological performance of PVD coated surfaces. In this work two different patterns of laser surface texturing were performed on H13 substrate, and PVD AlCrSiN coatings with various N2 contents were made by unbalanced magnetron sputtering on the textured H13 specimens. The coating characteristics such as crystalline structure, surface morphology, hardness, and friction coefficient of the coatings as a function of the N2 partial pressure were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), microhardness tester, and wear test. Synthesis of the AlCrSiN thin films containing various N2 contents was successful using the unbalanced magnetron sputtering process. A dense and compact microstructure, as well as a very smooth surface,were observed from the synthesized thin films, which could be attributed to the addition of Si into the AlCrN films, producing an amorphous phase in the films. Also the hardness of the AlCrSiN films increased with increasing N2 partial pressures and the maximum hardness of approximately 33 GPa was measured from the AlCrSiN film synthesized with N2 partial pressures of 0.16 Pa. From the wear tests against an Al2O3 counterpart ball at room temperature without lubrication, the average friction coefficient of the non-textured AlCrSiN films of 0.42 was decreased to 0.38 and 0.36 for dimple-textured and honeycomb-textured AlCrSiN films, respectively. Laser surface texturing on the AlCrSiN films reduced the friction coefficients by approximately more than 15%, and further improvement on the tribological performance of the textured surfaces could be possible by optimizing the honeycomb-textured surfaces.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0