지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.1
- 수록면
- 327 - 333 (7page)
이용수
초록· 키워드
오류제보하기
Aluminum foam has been produced by sintering and dissolution processes using NaCl powders as a space holder. In this research, glycerin is used as a novel lubricant along with acetone. The effects of the processing parameters including compacting pressure, sintering temperatures (620, 640 and 650 °C), size, and volume fraction of the space holder, on the physical and mechanical properties of the produced foams have been investigated. Due to segregation of the Al and NaCl powders at high compaction pressures, spalling of Al foams was observed. Meanwhile, adding small amounts of acetone and glycerin to the mixture ensures homo-geneity and prevents segregation of dissimilar powders at varying pressure. Moreover, the addition of glycerin provides an improved homogenous stress distribution within the produced foams during mechanical testing,which in turn halts crack propagation. Meanwhile, an alternative technique to remove NaCl particles during the dissolution stage has been proposed. The results showed that high quality foams were successfully produced under a compaction pressure range of 250-265 MPa and sintering temperature of 650 °C.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0