지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.12
- 수록면
- 612 - 617 (6page)
- DOI
- 10.7316/KHNES.2021.32.6.612
이용수
초록· 키워드
오류제보하기
In the case of a metal sulfide electrode, it is used as an anode or cathode active material in a lithium battery. The reason is that the voltage exists between 0.8 and 2.0 V via lithium electrode and the discharge and charge capacity is high. In order to manufacture nickel sulfide for electrode, which are widely used, nano-nickel powder was sulfided using ammonium polysulfide, and single-phase NiS electrodes were manufactured through heat treatment. The prepared NiS electrode had a high initial capacity of 500 mAh/g or more, and was stabilized after 20 cycles to maintain a capacity of 400 mAh/g or more until 100 cycles.
목차
Abstract
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
References
참고문헌 (12)
참고문헌 신청
K. S. Lee / 2007 / Structural and electrochemical properties of layered Li [Ni1-2xCoxMnx] O2(x = 0. 1-0. 3)positive electrode materials for Li-Ion batteries / J. Electrochem. Soc 154(10):A971~A977
K. Zhang / 2019 / Study on the effect of transition metal sulfide in lithium–sulfur battery / Inorg. Chem. Front 6(2):477~481
J. Z. Wang / 2008 / Nickel sulfide cathode in combination with an ionic liquid-based electrolyte for rechargeable lithium batteries / Solid State Ionics 179(40):2379~2382
Sang-Cheol Han / 2003 / Electrochemical properties of NiS as a cathode material for rechargeable lithium batteries prepared by mechanical alloying / Journal of Alloys and Compounds 349(1-2):290~296
Sang-Cheol Han / 2003 / Nickel sulfide synthesized by ball milling as an attractive cathode material for rechargeable lithium batteries / Journal of Alloys and Compounds 351(1-2):273~278
K. Zhang / 2019 / Study on the effect of transition metal sulfide in lithium–sulfur battery / Inorg. Chem. Front 6(2):477~481
J. Z. Wang / 2008 / Nickel sulfide cathode in combination with an ionic liquid-based electrolyte for rechargeable lithium batteries / Solid State Ionics 179(40):2379~2382
Sang-Cheol Han / 2003 / Electrochemical properties of NiS as a cathode material for rechargeable lithium batteries prepared by mechanical alloying / Journal of Alloys and Compounds 349(1-2):290~296
Sang-Cheol Han / 2003 / Nickel sulfide synthesized by ball milling as an attractive cathode material for rechargeable lithium batteries / Journal of Alloys and Compounds 351(1-2):273~278
이 논문의 저자 정보
이 논문과 함께 이용한 논문
TBM 터널 굴진시 Jamming이 발생되는 지반의 공학적 특성에 대한 연구
유길환
,
황대영
,
정성교
대한토목학회논문집 C
2007
.11
NCM계 리튬이온전지 분리막의 열화에 따른 열적·전기적 특성
김지연
,
최상재
,
전주현
외 2명
전기학회논문지
2024
.12
민수용 ESS 화재사례를 고려한 잠수함용 리튬전지체계 안전성 설계 및 검증
연제길
,
류지훈
Journal of the KNST
2023
.09
고에너지밀도 전고체전지 구현을 위한 황화물계 고체전해질 시트 연구개발 동향
박희택
한국전지학회지
2023
.07
수전해용 니켈기반 복합체 전기화학촉매 합성 및 특성 분석
임동욱
,
이은상
,
백성현
한국생산제조학회 학술발표대회 논문집
2021
.12
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2022-550-000127407