지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 993 - 999 (7page)
이용수
초록· 키워드
오류제보하기
Study Design: The strength effects of a pedicle screw-rod system supplemented with a novel cross-link configuration were biomechanically evaluated in porcine spines. Purpose: To assess the biomechanical differences between a conventional cross-link pedicle screw-rod system versus a novel crosslink instrumentation, and to determine the effect of the cross-links. Overview of Literature: Transverse cross-link systems affect torsional rigidity, but are thought to have little impact on the sagittal motion of spinal constructs. We tested the strength effects in pullout and flexion-compression tests of novel cross-link pedicle screw constructs using porcine thoracic and lumbar vertebrae. Methods: Five matched thoracic and lumbar vertebral segments from 15 porcine spines were instrumented with 5.0-mm pedicle screws, which were then connected with 6.0-mm rods after partial corpectomy in the middle vertebral body. The forces required for construct failure in pullout and flexion-compression tests were examined in a randomized manner for three different cross-link configurations: un-cross-link control, conventional cross-link, and cross-link passing through the base of the spinous process. Statistical comparisons of strength data were analyzed using Student’s t -tests. Results: The spinous process group required a significantly greater pullout force for construct failure than the control group (p =0.036). No difference was found between the control and cross-link groups, or the cross-link and spinous process groups in pullout testing. In flexion-compression testing, the spinous processes group required significantly greater forces for construct failure than the control and cross-link groups (p <0.001 and p =0.003, respectively). However, there was no difference between the control and cross-link groups. Conclusions: A novel cross-link configuration that features cross-link devices passing through the base of the spinous processes increased the mechanical resistance in pullout and flexion-compression testing compared to un-cross-link constructs. This configuration provided more resistance to middle-column damage under flexion-compression testing than conventional cross-link configuration.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Pullout Strength Predictor: A Machine Learning Approach
Asian Spine Journal
2019 .01
-
척추의 해부학적 요소를 고려한 척추경 나사못 디자인의 Pullout 특성 연구
의공학회지
2021 .01
-
Evaluating Pedicle-Screw Instrumentation Using Decision-Tree Analysis Based on Pullout Strength
Asian Spine Journal
2018 .01
-
Comparison of the Pullout Strength of Different Pedicle Screw Designs and Augmentation Techniques in an Osteoporotic Bone Model
Asian Spine Journal
2018 .01
-
The Mechanical Effect of Rod Contouring on Rod-Screw System Strength in Spine Fixation
대한신경외과학회지
2016 .01
-
Pullout Strength after Expandable Polymethylmethacrylate Transpedicular Screw Augmentation for Pedicle Screw Loosening
대한신경외과학회지
2015 .01
-
Utilization of Spinal Navigation to Facilitate Hassle-Free Rod Placement during Minimally-Invasive Long-Construct Posterior Instrumentation
Asian Spine Journal
2019 .01
-
Evaluation of the mechanical properties and clinical efficacy of biphasic calcium phosphate-added collagen membrane in ridge preservation
Journal of Periodontal & Implant Science
2020 .01
-
척추경 나사못의 디자인이 고정력 및 구동 토크에 미치는영향 분석: 이중 나사 및 이중 피치 나사
의공학회지
2018 .01
-
Computed Tomographic Morphometric Analysis of C1 and C2 for Lamina Cross Screw Placement in Malay Ethnicity
Asian Spine Journal
2021 .01
-
Comparative Analysis of Effect of Density, Insertion Angle and Reinsertion on Pull-Out Strength of Single and Two Pedicle Screw Constructs Using Synthetic Bone Model
Asian Spine Journal
2016 .01
-
A Prospective Study on the Feasibility, Safety, and Efficacy of a Modified Technique to Augment the Strength of Pedicle Screw in Osteoporotic Spine Fixation
Asian Spine Journal
2020 .01
-
Impact of Screw Diameter and Length on Pedicle Screw Fixation Strength in Osteoporotic Vertebrae: A Finite Element Analysis
Asian Spine Journal
2021 .10
-
The Optimal Suture Site for the Repair of Posterior Horn Root Tears: Biomechanical Evaluation of Pullout Strength in Porcine Menisci
Knee Surgery and Related Research
2016 .01
-
Biomechanical Comparison of Spinal Fusion Methods Using Interspinous Process Compressor and Pedicle Screw Fixation System Based on Finite Element Method
대한신경외과학회지
2016 .01
-
The Effects of Sitting in a Crossed Legs Posture on the Vertebral Angle, Chest Wall Mobility, Pulmonary Function, and Respiratory Muscle Activity: A Preliminary Study
대한물리의학회지
2019 .01
-
Floor-Mounted Robotic Pedicle Screw Placement in Lumbar Spine Surgery: An Analysis of 1,050 Screws
Neurospine
2023 .06
-
Metformin-loaded Citric Acid Cross-linked Agarose Films in the Prevention of Postoperative Abdominal Adhesion
대한체질인류학회 학술대회 연제 초록
2019 .05
-
나사 파단 예방을 위해 새로 디자인한 경비 인대 결합 나사의 효용성: 생역학 연구
대한족부족관절학회지
2020 .01
-
Screw-in forces during instrumentation by various file systems
Restorative Dentistry and Endodontics
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0