메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Tahiana F. C. Hermenegildo (Universidade Federal de Pernambuco) Tiago F. A. Santos (Universidade Federal de Pernambuco) Edwar A. Torres (Universidad de Antioquia) Conrado R. M. Afonso (Universidade Federal de São Carlos) Antonio J. Ramirez (Ohio State University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.24 No.5
발행연도
2018.1
수록면
1,120 - 1,132 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Evaluation was made of friction stir welded joints, identifying conditions that resulted in satisfactory welded joints free fromdefects and with microstructural characteristics that provided good mechanical properties. Microstructural characterizationand cooling curve analysis of the joints with lower and higher heat inputs evidenced deformation below and above the nonrecrystallizationtemperature (T nr ) and dynamic recrystallization during microstructural evolution. Microscopy analysesshowed acicular ferrite, bainitic ferrite, and coalesced bainite microstructures in the stir zone of the cold weld (lower heatinput), while the stir zone of the hot weld (higher heat input) contained bainitic ferrite, acicular ferrite, coalesced bainite,martensite, and dispersed carbides. Granular bainite and dispersed carbides were observed in all the heat aff ected zones. Analysis of the microstructural transformations, together with the thermal history of the joints, showed that the variable thathad the greatest infl uence on the morphology of the bainite (granular bainite/bainitic ferrite) was the deformation temperature.

목차

등록된 정보가 없습니다.

참고문헌 (56)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0