지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.1
- 수록면
- 1,046 - 1,057 (12page)
이용수
초록· 키워드
오류제보하기
The mechanical properties, corrosion behavior and microstructures of the Al–Zn–Mg–Cu alloy under various ageing treatmentswere investigated comparatively. The results show that the tensile strength and corrosion resistance are stronglyaff ected by the precipitate state. Massive fi ne intragranular precipitates contribute to high strength. Discontinuous coarsegrain boundary precipitates containing high Cu content, as well as the narrow precipitate free zone, result in low corrosionsusceptibility. After the non-isothermal ageing (NIA) treatment, the tensile strength of 577 MPa is equivalent to that of579 MPa for the T6 temper. Meanwhile, the stress corrosion susceptibility r tf and the maximum corrosion depth are 97.8%and 23.5 μm, which are comparable to those of 92.8% and 26.7 μm for the T73 temper. Moreover, the total ageing timeof the NIA treatment is only 7.25 h, which is much less than that of 48.67 h for the retrogression and re-ageing condition.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Microstructure and Mechanical Properties of a Highly Alloyed Al–Zn–Mg–Cu–Zr Alloy Under T6I4 and T6R6I4 Agings
Metals and Materials International
2024 .04
-
Effects of Pre-ageing on Microstructure and Mechanical Properties of T9I6 Treated 2519A Aluminium Alloy
Metals and Materials International
2018 .01
-
정밀주조 Hastelloy C-276 합금의 미세조직과 기계적 성질에 미치는 W 함량과 열처리의 영향
한국주조공학회지 (주조)
2017 .01
-
Measurement and Theoretical Calculation Confirm the Improvement of T7651 Aging State Influenced Precipitation Characteristics on Fatigue Crack Propagation Resistance in an Al–Zn–Mg–Cu Alloy
Metals and Materials International
2021 .01
-
Utilization of Hot Deformation to Trigger Strain-Induced Boundary Migration, Particle-Stimulated Nucleation, and Influence of Nano-Precipitates on Mechanical Properties in High-Alloyed Al–Zn–Mg–Cu Alloys
Metals and Materials International
2024 .08
-
Influence of Ageing on the Intergranular Corrosion of an Al?Mg?Si Alloy
Metals and Materials International
2021 .12
-
프로젝션 용접 전극을 위한 시효경화성 Cu-2.0wt%Be 합금의 미세조직과 기계적성질
한국재료학회지
2015 .01
-
Influence of neutron irradiation and ageing on behavior of SAV-1 reactor alloy
Nuclear Engineering and Technology
2021 .10
-
Mg-Al 합금에서 등온 시효 중 경도 변화의 미세조직 의존성
열처리공학회지
2019 .01
-
항공기 엔진 부품용 고강도 Al-Zn-Mg-Cu계 합금 개발
한국소성가공학회 학술대회 논문집
2024 .10
-
Microstructure, Mechanical Properties and Tribological Behavior of Two-Phase Mg–Y–Cu Alloys with Long Period Stacking Ordered Phases
Metals and Materials International
2021 .01
-
Effect of Precipitate Characteristics on the Corrosion Behavior of a AZ80 Magnesium Alloy
Metals and Materials International
2021 .09
-
Improvement of Corrosion Resistance in Cu-Deposited Zn-Mg-Al alloy coated steel
한국표면공학회 학술발표회 초록집
2024 .10
-
Understanding dual precipitation strengthening in ultra-high strength low carbon steel containing nano-sized copper precipitates and carbides
Nano Convergence
2017 .07
-
Modeling the Age-Hardening Process of Aluminum Alloys Containing the Prolate/Oblate Shape Precipitates
Metals and Materials International
2021 .01
-
Effect of Heat Treatment on Interfacial and Mechanical Properties of A6022/ A7075/A6022 Roll-Bonded Multi-Layer Al Alloy Sheets
Metals and Materials International
2016 .01
-
Pre-Aging Time Dependence of Microstructure and Mechanical Properties in Nanostructured Al-2wt%Cu Alloy
Metals and Materials International
2016 .01
-
Tailoring Mechanical Properties of a Low Carbon Cu-Containing Structural Steel by Two-Step Intercritical Heat Treatment
Metals and Materials International
2019 .01
-
Incoloy 825 합금의 기계적 성질에 미치는 열처리의 영향
열처리공학회지
2017 .01
-
Effect of Surface Pre-treatments and Ageing on the Adhesive Strength of Polymer Joints
폴리머
2017 .09
이 논문의 저자 정보
최근 본 자료
댓글(0)
0