메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
박성혁 (경북대학교) 이태경 (Kumamoto University) 임상훈 (경북대학교) 이종수 (포항공과대학교)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.23 No.6
발행연도
2017.1
수록면
1,176 - 1,187 (12page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Variation in the microstructure and tensile properties with the warm drawing strain and subsequent annealing of0.45 wt% C (45C) medium-carbon steel and 0.82 wt% C (82C) high-carbon steel was investigated. The morphologyand size of ferrite and pearlite changed considerably with applied strain during drawing and with annealingtemperature and time, which made the tensile properties of the drawn steels vary considerably. With increasingdrawing strain to ~2.5, the yield strength increased significantly from 393 to 1332 MPa for the 45C steel and from673 to 1876 MPa for the 82C steel; this was attributed mainly to the strain hardening caused by severely deformedferrite and/or enhanced particle hardening caused by cementite segmentation. During annealing of heavily drawnsteels, ferrite grain growth and coarsening of broken cementite particles occurred simultaneously, which causedeffective recovery of the ductility of severely drawn steels. These results demonstrate that the tensile strength andelongation of medium- and high-carbon steel wires can be tuned considerably by controlling the extents of drawingand annealing, thereby widening their applicability and facilitating their manufacture to match their mechanicalproperties to each application.

목차

등록된 정보가 없습니다.

참고문헌 (24)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0