메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Kyunghoon Lee (Pusan National University) 강남현 (Pusan National University) Jong-Seong Bae (Korea Basic Science Institute) Chang-Woo Lee (Korea Institute of Industrial Technology)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.22 No.5
발행연도
2016.1
수록면
842 - 848 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
This study aims to understand the microstructural behavior of nitriding compound layer and its effect on Nb-carbonitride growth produced by the thermo-reactive diffusion (TRD) process. Gas nitriding was performed at 550 °C for 3 and 6 h, followed by TRD at 900 °C for 6 h. The nitriding compound layers had thicknesses of 10 and 16 μm for nitriding time of 3 and 6 h, respectively. The corresponding Nb-carbonitride layers produced by TRD were 7.2 and 11.2 μm thick, respectively. Reheating at 900 °C transformed the microstructure of the nitriding compounds to Fe3O4 and FeN0.0939. As reheating proceeded to 30 min, high concentration of nitrogen, initially existing in the nitride layer diffused to 80–90 μm into the substrate. Therefore, the TRD process produced NbN layer at the interfacial area due to intensively dissolved nitrogen from FeN0.0939. As the TRD proceeded, supply of C atoms from the base metal became competitive with the N diffusion. Thus, the TRD coating layer was grown to above the interface. Reheating at 900 °C for the 16-μm-thick nitride layer resulted in a nitrogen content ~0.4 at% higher than that for the 10-μm-thick nitride layer, thereby producing a thicker Nb-carbonitride layer.

목차

등록된 정보가 없습니다.

참고문헌 (25)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0