메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Soo-Hyun Joo (Tohoku University) Dong-Hai Pi (Yanbian University of Science and Technology) Jing Guo (Shandong Agricultural University) Hidemi Kato (Tohoku University) Sunghak Lee (Pohang University of Science and Technology) Hyoung Seop Kim (Pohang University of Science and Technology)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.22 No.3
발행연도
2016.1
수록면
383 - 390 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Wear properties of bulk metallic glasses (BMGs) are important for industrial applications as much as strength and ductility. Free volume of BMGs is a significant factor which decides wear mechanism and resistance. Increased free volume of a Zr55Al10Ni5Cu30 BMG processed by high-pressure torsion (HPT) affected wear resistance under dry reciprocating conditions. Two- and three-body abrasive wear as well as the delamination of oxide layers simultaneously operated during the wear tests of both as-cast and HPT-processed BMG (HPT-BMG). However, the HPT- BMG had a larger area of the oxide layers on a worn surface compared to the as-cast BMG at the early stage of the wear tests. The increased free volume by the HPT process resulted in ductile plastic deformation, prohibited crack propagation, and delayed delamination of the oxide layers. Therefore, the HPT-BMG had thicker oxide layers, which acted as an adequate protection and increased wear properties of the Zr-based BMG.

목차

등록된 정보가 없습니다.

참고문헌 (52)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0