지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.21 No.2
- 발행연도
- 2016.1
- 수록면
- 303 - 321 (19page)
이용수
초록· 키워드
오류제보하기
Tubular column members have been widely adopted in current construction due to its numerous advantages. However, the closed-section profile characteristics of tubular columns severely limit the connection possibilities. Welding type is acceptable but discouraged because of on-site issues. Blind-bolted connection is preferable because of its simplicity, economic benefit, and easy assembly. This paper presents a state-of-the-art review on bolted connections to tubular columns for bare steel tubes, including square and circular sections. Available studies on bolted connections at ambient and elevated temperatures are reviewed, but emphasis is given on the latter. Various methods of determining the connection performance through experimental, analytical, component based, and finite element approaches are examined. Future research areas are also identified.
목차
등록된 정보가 없습니다.
참고문헌 (78)
참고문헌 신청
Adam, S.M. / Steel Special Moment Frames - Connection Seismic Requirements
Al-Rodan, A.-K. / 2004 / T-cleat connections to concrete-filled tubular internal columns / J. Struct. Eng. 130(5):725~731
AlHendi, H. / 2015 / Parametric study on moment–rotation characteristics of reverse channel connections to tubular columns / J. Construct. Steel Res. 104:261~273
Alostaz, Y.M. / 1996 / Analytical behavior of connections to concrete-filled steel tubes / J. Construct. Steel Res. 40(2):95~127
Bagheri Sabbagh, A. / 2013 / Detailing of I-beam-to-CHS column joints with external diaphragm plates for seismic actions / J. Construct. Steel Res. 88:21~33
Al-Rodan, A.-K. / 2004 / T-cleat connections to concrete-filled tubular internal columns / J. Struct. Eng. 130(5):725~731
AlHendi, H. / 2015 / Parametric study on moment–rotation characteristics of reverse channel connections to tubular columns / J. Construct. Steel Res. 104:261~273
Alostaz, Y.M. / 1996 / Analytical behavior of connections to concrete-filled steel tubes / J. Construct. Steel Res. 40(2):95~127
Bagheri Sabbagh, A. / 2013 / Detailing of I-beam-to-CHS column joints with external diaphragm plates for seismic actions / J. Construct. Steel Res. 88:21~33
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Investigation of the effect of bolt diameter and end plate thickness change on bolt column-beam connection
Structural Engineering and Mechanics, An Int＇l Journal
2024 .01
-
Anchored blind bolted composite connection to a concrete filled steel tubular column
Steel and Composite Structures, An International Journal
2017 .01
-
Reliabilities of distances describing bolt placement for high strength steel connections
Structural engineering and mechanics : An international journal
2015 .01
-
Reliabilities of distances describing bolt placement for high strength steel connections
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Shear transfer mechanism in connections involving concrete filled steel columns under shear forces
Steel and Composite Structures, An International Journal
2018 .01
-
An experimental study of the behaviour of double sided bolted billet connections in precast concrete frames
Steel and Composite Structures, An International Journal
2018 .01
-
Effect of bolted splice within the plastic hinge zone on beam-to-column connection behavior
Steel and Composite Structures, An International Journal
2018 .01
-
원웨이볼트를 사용한 각형강관 기둥이음부의 강도 평가
한국강구조학회 학술대회 발표집
2020 .06
-
Analysis of extended end plate connection equipped with SMA bolts using component method
Steel and Composite Structures, An International Journal
2020 .01
-
Cyclic behavior of extended end-plate connections with shape memory alloy bolts
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Effect of connection modeling on the seismic response of steel braced non-moment resisting frames
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Study and design of assembled CFDST column-beam connections considering column wall failure
Steel and Composite Structures, An International Journal
2021 .01
-
냉간성형 탄소강 이면전단 볼트접합부 최대내력에 관한 실험적 고찰
대한건축학회논문집
2022 .05
-
Tensile behavior of bolted through-diaphragm connections to SHS columns
Structural Engineering and Mechanics, An Int＇l Journal
2021 .11
-
A component method model for blind-bolts with headed anchors in tension
Steel and Composite Structures, An International Journal
2015 .01
-
Experimental and Numerical Researches on the Seismic Behavior of Tubular Reinforced Concrete Columns of Air-Cooling Structures
International Journal of Concrete Structures and Materials
2017 .09
-
Cyclic behavior of extended end-plate connections with shape memory alloy bolts
Structural engineering and mechanics : An international journal
2016 .01
-
Influence of shear bolt connections on modular precast steel-concrete composites for track support structures
Steel and Composite Structures, An International Journal
2018 .01
-
Simplified criteria for finite element modelling of European preloadable bolts
Steel and Composite Structures, An International Journal
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0