지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.59 No.2
- 발행연도
- 2016.1
- 수록면
- 313 - 326 (14page)
이용수
초록· 키워드
오류제보하기
In this study the three-dimensional nonlinear finite element method was used to analyze the stresses distribution in the adhesive layer used to joint two Aluminum 2024-T3 adherends. We consider in this study the effect of different parameters witch directly affect the values of different stresses. The experimental design method is used to investigate the effects of geometrical parameters of the single lap joint in order to achieve an optimization of the assembly with simple lap joint. As a result, it can be said that both the geometrical modifications of the adhesive and adherends edge have presented a significant effect at the overlap edge thereby causing a decrease in peel and shear stresses. In addition, an analytical model is also given to predict in a simple but effective way the joint strength and its dependence on the geometrical parameters. This approach can help the designers to improve the quality and the durability of the structural adhesive joints.
목차
등록된 정보가 없습니다.
참고문헌 (27)
참고문헌 신청
2009 / ABAQUS/CAE, Ver 6.9 User's Manual / Hibbitt, Karlsson and Sorensen, Inc
Adams, R. / 1986 / Stress analysis and failure properties of carbon-fibre reinforced plastic/steel double lap-joint / J. Ahdes 20:29~30
Adams, R.D. / 1974 / Stress analysis of adhesive-bonded lap joints / J. Strain Anal 9(3):185~196
Akpinar, S. / 2014 / The strength of the adhesively bonded step-lap joints for different step numbers / Compos. Part B 67:170~178
Aicha Benchiha / 2015 / Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint / Structural Engineering and Mechanics, An Int＇l Journal 53(5):1017~1030
Adams, R. / 1986 / Stress analysis and failure properties of carbon-fibre reinforced plastic/steel double lap-joint / J. Ahdes 20:29~30
Adams, R.D. / 1974 / Stress analysis of adhesive-bonded lap joints / J. Strain Anal 9(3):185~196
Akpinar, S. / 2014 / The strength of the adhesively bonded step-lap joints for different step numbers / Compos. Part B 67:170~178
Aicha Benchiha / 2015 / Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint / Structural Engineering and Mechanics, An Int＇l Journal 53(5):1017~1030
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
A new analytical approach for optimization design of adhesively bonded single-lap joint
Structural engineering and mechanics : An international journal
2016 .01
-
Numerical analysis of the combined aging and fillet effect of the adhesive on the mechanical behavior of a single lap joint of type Aluminum/Aluminum
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint
Structural engineering and mechanics : An international journal
2015 .01
-
Influence of the presence of defects on the stresses shear distribution in the adhesive layer for the single-lap bonded joint
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Shear Strength of an Aluminum Alloy Bonded with a DP-460 Adhesive: Single Lap–shear Joints
접착 및 계면
2020 .01
-
동종금속 및 이종금속 단일 겹침 접착 시편의파손모드 및 파손강도에 관한 연구
한국전산구조공학회논문집
2019 .01
-
Humidity Aging Effect on Adhesive Strength of Composite Single-lap Joint
International Journal of Aeronautical and Space Sciences
2017 .03
-
테라헤르츠 파를 이용한 복합재 에폭시 접착 조인트의 흡습에 따른 접착력 및 특성 평가
대한기계학회 춘추학술대회
2017 .11
-
압전성 PVDF 필름센서를 이용한 단면 겹치기 접착조인트의 피로수명 예측에 관한 연구
대한기계학회 춘추학술대회
2016 .12
-
균열크기가 복합재 단일겹침 체결부 강도에 미치는 영향 연구
한국항공우주학회 학술발표회 초록집
2019 .04
-
Effect of shear deformation on adhesive stresses in plated concrete beams: Analytical solutions
Computers and Concrete, An International Journal
2015 .03
-
첨단복합재료 적층판의 볼트 단일접합 강도 시험적 평가
대한기계학회 춘추학술대회
2016 .12
-
An experimental and numerical investigation on fatigue of composite and metal aircraft structures
Steel and Composite Structures, An International Journal
2022 .04
-
Structural joint modeling and identification: numerical and experimental investigation
Structural engineering and mechanics : An international journal
2015 .01
-
The effect of surface roughness on adhesion strength of metal to polymer single-lap joint
한국고분자학회 학술대회 연구논문 초록집
2015 .04
-
고분자 접착제와 금속 피착재의 접착강도에 미치는 피착재 두께의 영향
마이크로전자 및 패키징학회지
2020 .01
-
Relaxation of Singular Stress in Adhesively Bonded Joint at High Temperature
반도체디스플레이기술학회지
2018 .01
-
Development of dynamic behavior of the novel composite T-joints: Numerical and experimental
Advances in aircraft and spacecraft science
2018 .01
-
Single Lap 볼트 체결부 거동 예측을 위한 형상 및 재료 변수 영향 분석
한국정밀공학회 학술발표대회 논문집
2023 .11
-
Effect of frictional damping on dynamic response of lap joint
한국트라이볼로지학회 학술대회
2020 .09
이 논문의 저자 정보
최근 본 자료
댓글(0)
0