지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
This study is to evaluate the usefulness of noise reduction for mobile abdomen X-raywhich could be the reason of unnecessary medical exposure by evaluating the exposure dose andimage quality. GM85 (Samsung) was used for Mobile X-ray machine. SID was 110 cm and 80 kVpwas used. Collimation size was 14″×17″. Phantom PBU-60 was used. Nero-max 8000, PCXMCprogram was used to calculate effective dose and ESD for dose evaluation. SPSS 18.0 programwas used for statistical analysis. According to reducing mAs (6.4, 5.1, 4.0, 3.2) by the step, mobileabdomen images were acquired. Each images were applied by noise reduction of 6 steps (0, 1, 2, 3, 4,5). All of them were evaluated quantitatively by Image J program. They are evaluated qualitativelyby two residents who are majoring in Department of Radiology for 4 years. In the dose evaluationas the standard of the exposure condition (80 kVp, 8 mAs) DAP was 6.77 dGycm2. When the value ofmAs was decreasing, exposure dose was decreased by maximum 70% and effective dose was reducedby appropriately 60%. In the cases of stomach and urinary bladder, the value shows the biggestdifference. In the image quality evaluation as the Standard of the exposure condition (80 kVp, 8mAs) when the mAs was 4.0 and noise reduction was not used PSNR was decreased less than 30 dB. However, when mAs was 3.2 and 4 and 5 step of noise reduction were used there was no differenceof image quality (each PSNR, 30.577 and 30.768 dB). In the qualitative evaluation, all images arepossible to be read for medical image. When mobile abdomen X-ray exam was perform, if noisereduction method could be used with proper mAs, exposure dose would be decreased by maximum70%. Moreover, it will decrease still unnecessary medical exposure.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
소음지도를 이용한 금속재료품 제조공정의 소음저감
한국기계기술학회지
2019 .01
-
대형기계 및 고출력기계의 소음 측정방법 및 저감 대책에 관한 연구
한국기계기술학회지
2020 .01
-
축류팬용 Pod형 원형 소음기의 환형 공기층 수에 따른 소음저감 특성
한국유체기계학회 학술대회 논문집
2019 .07
-
통계적 방법을 이용한 복층 저소음포장의 소음저감효과 분석
한국도로학회논문집
2017 .01
-
소음지도를 이용한 금속재료품 제조공정의 소음저감 순위 결정
한국기계기술학회지
2016 .01
-
실측자료를 통한 구간단속카메라의 소음저감효과 분석
한국소음진동공학회논문집
2017 .02
-
Noise Reduction Performance of Active Noise Control System with Noise Barrier Theoretical Control Filter
제어로봇시스템학회 국제학술대회 논문집
2020 .10
-
소음지도 프로그램에 의한 도로교통 소음평가- 익산시를 중심으로 -
한국기계기술학회지
2021 .01
-
Sources, Effects, and Control of Noise in Indoor/Outdoor Living Environments
대한인간공학회지
2015 .06
-
소음지도에 의한 선박 건조 및 수리 공정의 소음저감 순위 결정
한국기계기술학회지
2017 .01
-
An Acoustic Analysis of Noise Environments during Mobile Device Usage
International journal of advanced smart convergence
2017 .01
-
A Review of Mitigation Measures for Reducing Railway Rolling Noise from an Infrastructure Point of View
International Journal of Railway
2019 .03
-
가우시안 및 임펄스 잡음 제거를 위한 다이아몬드 마스크 형태의 저역 통과 필터 기법
대한전자공학회 학술대회
2017 .11
-
도시철도용 구동기어의 설계 요소에 대한 소음 기여도 분석
한국소음진동공학회 학술대회논문집
2015 .04
-
소음 자동측정망을 활용한 대구경 화포 사격소음의 식별과 분석
한국환경기술학회지
2021 .01
-
천안시청 주변의 소음 평가 및 소음지도 작성
공학기술논문지
2016 .12
-
도심지 내 복층 저소음포장 설치에 따른 소음저감 사례연구
한국도로학회논문집
2016 .01
-
A Study on the Total Noise Reduction of the Excavator
한국소음진동공학회 학술대회논문집
2016 .10
-
Plant 내 냉각탑 소음 영향성 예측에 의한 최적 방음 대책 방안 연구
한국소음진동공학회 학술대회논문집
2018 .04
-
A Study on the Noise Reduction in Railway Vehicles using Bone Conduction Device : Railway noise analysis and Understanding Acoustic Characteristics of Bone Conduction Devices
International journal of internet, broadcasting and communication : IJIBC
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0