지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.1
- 수록면
- 2,078 - 2,094 (17page)
이용수
초록· 키워드
오류제보하기
Thermal mechanisms of microstructural refnement in steels were reviewed. These include thermal cycling, martensiteprocess, and static recrystallization (SRX), in which the dominant stage of microstructural refnement is governed by anannealing treatment of a deformed or an undeformed material. Recent progress in grain refnement by thermal cycling forthe body-centered cubic, face-centered cubic, and dual phase (DP) steels was introduced. The application of the cold rollingand subsequent annealing of a martensite starting structure (martensite process) for grain refnement of low-carbon and DPsteels was reviewed. The formation and reversion of strain-induced martensite in metastable austenitic stainless steels andtheir efects on the microstructural evolutions were critically discussed. Moreover, the repetition of the martensite processand its limitations were explained. Important fndings on the SRX of ferrite and austenite for grain refnement as well as therecrystallization kinetics were presented. Finally, the concepts of controlled rolling for grain refnement and the interaction ofaustenite recrystallization and strain-induced precipitation in microalloyed steels during thermomechanical processing werealso reviewed. This short overview presents the opportunities that the conventional and innovative processing routes canofer for grain refnement of steels.
목차
등록된 정보가 없습니다.
참고문헌 (164)
참고문헌 신청
A. A. Howe / 2009 / Industry perspective on ultrafne grained steels / Mater. Sci. Technol 25:815~819
G.E. Dieter / 1988 / Mechanical Metallurgy / McGraw-Hill
R. Song / 2006 / Overview of processing, microstructure and mechanical properties of ultrafne grained bcc steels / Mater. Sci. Eng. A 441:1~17
B. Verlinden / 2007 / Thermomechanical Processing of Metallic Materials / Elsevier
G. Krauss / 2017 / Tempering of lath martensite in low and medium carbon steels : assessment and challenges / Steel Res. Int 88:1700038
G.E. Dieter / 1988 / Mechanical Metallurgy / McGraw-Hill
R. Song / 2006 / Overview of processing, microstructure and mechanical properties of ultrafne grained bcc steels / Mater. Sci. Eng. A 441:1~17
B. Verlinden / 2007 / Thermomechanical Processing of Metallic Materials / Elsevier
G. Krauss / 2017 / Tempering of lath martensite in low and medium carbon steels : assessment and challenges / Steel Res. Int 88:1700038
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Development of Ultrafine Grain Structure in an Al–Mg–Mn–Sc–Zr Alloy During High-Temperature Multidirectional Isothermal Forging
Metals and Materials International
2021 .01
-
Development of an Advanced Ultrahigh Strength TRIP Steel and Evaluation of Its Unique Strain Hardening Behavior
Metals and Materials International
2020 .01
-
Effects of Grain Boundary on {100} Recrystallization Texture of High Silicon Electrical Steel
Metals and Materials International
2018 .01
-
On the Reversion and Recrystallization of Austenite in the Interstitially Alloyed Ni-Free Nano/Ultrafi ne Grained Austenitic Stainless Steels
Metals and Materials International
2019 .01
-
EBSD analyses of ultrafine-grained 0.18 wt.%C steel subjected to differential-speed rolling and static-recrystallization
한국소성가공학회 학술대회 논문집
2021 .05
-
역변태 Fe-Cr-Mn계 변태유기소성 스테인레스강의 결정립 크기에 따른 상온인장변형 거동
소성·가공
2023 .04
-
Influence of Forging Temperature on the Microstructures and Mechanical Properties of a Multi-Directionally Forged Al?Cu?Li Alloy
Metals and Materials International
2022 .02
-
Grain Refinement of CoNiCrMo Non-equiatomic Medium Entropy Alloy
Metals and Materials International
2023 .01
-
Grain Refinement and Thermal Stability of 2219 Aluminum Alloy in the Warm Deformation Process
Metals and Materials International
2021 .11
-
Nucleation Mechanism of Discontinuous Dynamic Recrystallization with Restrained Grain Boundary Sliding
Metals and Materials International
2021 .12
-
Study on Recrystallization Kinetics and Mechanical Properties of Low Carbon Steel During High Temperature Annealing
대한설비공학회 학술발표대회논문집
2023 .11
-
Use and Application of High-Performance Steels for Steel Structures
한국강구조학회지
2017 .04
-
오스테나이트계 고망간강의 인장 특성에 미치는 결정립 크기의 영향
한국재료학회지
2016 .01
-
변형률 속도에 따른 탄소강의 재결정 거동에 미치는 미량 합금 원소의 영향
한국재료학회지
2016 .01
-
Development of Grain Boundary Character Distribution in Medium‑Strained 316L Stainless Steel During Annealing
Metals and Materials International
2019 .01
-
Contributions of Rare Earth Element (La,Ce) Addition to the Impact Toughness of Low Carbon Cast Niobium Microalloyed Steels
Metals and Materials International
2018 .01
-
방향성 전기강판에서 1차 재결정시 Si 함량과 냉간압연 횟수, 승온 속도에 따른 집합조직 발달
열처리공학회지
2018 .01
-
오스테나이트계 스테인리스 인발 무계목강관 공정조건과 결정립 미세화 상관관계 연구
한국소성가공학회 학술대회 논문집
2016 .10
-
Investigation on the Creep Behavior of AZ91 Magnesium Alloy Processed by Severe Plastic Deformation
Metals and Materials International
2020 .01
-
Bimodal-Structured Al?Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature
Metals and Materials International
2021 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0