메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Myoung Jin Chae (Ajou University) Ashutosh Sharma (Ajou University) Min Chul Oh (Korea Institute of Industrial Technology) Byungmin Ahn (Ajou University)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.27 No.4
발행연도
2021.1
수록면
629 - 638 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
In this study, we synthesized a new Al16.6Cu16.6Fe16.6Mn16.6Mg16.6Ti16.6lightweight high entropy alloy (LWHEA) by highenergy ball milling and spark plasma sintering (SPS). The effect of milling time (15, 30, 45, and 60 h) and SPS conditions(600 and 700 °C) on microstructure, hardness, and density of LWHEAs were studied. The results showed that milled LWHEAis base centered cubic (BCC) structured, consisting of dual BCC1/BCC2 matrix with dispersed minor Cu2Mgprecipitatesand Ti. After SPS of milled samples, the BCC2 phase fraction was increased gradually. The distribution of Ti was uniformup to 45 h milled sample SPSed at 600 °C. However, porosity was built up beyond 45 h milling and higher SPS temperature(700 °C). The presence of finer secondary phases in the HEA matrix contributes to the dispersion hardening. The optimummicrohardness and density of LWHEA AlCuFeMnMgTi were around 770 HV and 4.34 g cm−3 which is superior to otherconventional alloys such as Al or Ti-based alloys.

목차

등록된 정보가 없습니다.

참고문헌 (40)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0