지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
등록된 정보가 없습니다.
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
Thermal Plasma Spheroidization of High-Nitrogen Stainless Steel Powder Alloys Synthesized by Mechanical Alloying
Metals and Materials International
2018 .01
RF 플라즈마 처리를 이용한 칠보 유약 분말의 구상화 및 적층 제조 공정 적용
한국분말야금학회지
2020 .01
Investigation of Microstructure of Aluminum Based Composite Material Obtained by Mechanical Alloying
Metals and Materials International
2021 .01
열간압연 된 Fe55Co17.5Ni10Cr12.5Mo5 고엔트로피합금의 소둔 조건에 따른 기계적 특성 변화
소성·가공
2022 .10
Evolution on Microstructures and Tensile Properties of 10Cr-1Mo ODS Steel with Different Lengths of Mechanical Alloying Process Times
한국분말야금학회지
2021 .10
A356 및 A357 합금으로 용탕단조한 상용차 휠 허브의 미세 조직 및 석출상 변화에 따른 기계적 물성 비교
한국기계기술학회지
2020 .01
Investigation of Ball Size Effect on Microstructure and Thermoelectric Properties of p-type BiSbTe by Mechanical Alloying
한국분말야금학회지
2016 .01
기계적합금화법에 의한 연자성 복합분말의 제조 및 구조관찰
한국재료학회지
2019 .01
Study on Microstructure and Mechanical Properties of the Al–25Cr–5Si (at%) Alloy Powder Using Gas-Atomization and SPS Process
Metals and Materials International
2021 .01
MDCNTs가 함유된 ABS 컴파운드의 차폐 특성
한국생산제조학회 학술발표대회 논문집
2017 .12
Zr0.9Ti0.1Cr0.6Fe1.4 합금을 이용한 재활기기용 구동시스템 개발에 관한 연구
한국재활복지공학회 학술대회 논문집
2019 .11
RF 플라즈마 처리법에 기반한 기계적 밀링된 Zr 분말의 구형화에 따른 특성 변화
한국분말야금학회지
2021 .01
개량 Al-6.5Si 합금의 미세조직, 인장 및 충격 인성에 미치는 합금 원소 첨가의 영향
소성·가공
2020 .06
Influence of Mechanical Alloying Time on Microstructure and Wear Behaviors of Fe?Cu?C Alloy
Metals and Materials International
2021 .11
TiC 첨가량에 따른 개량된 A6013-3wt.%Si 합금 분말성형체의 미세조직 변화
한국분말야금학회지
2022 .02
Effect of Laser Power on Anisotropic Microstructure and Mechanical Behavior of Biomedical Ti-35Nb-15Zr (at%) Alloy Fabricated by Laser Powder Bed Fusion
Metals and Materials International
2024 .01
High Temperature Creep Properties of Al-Al<sub>4</sub>C<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub> Alloy by Mechanical Alloying
한국재료학회지
2016 .01
A Study on Improvement of Mechanical Toughness of High Alloy Tool Steel Powder Using Multi-layer AM Technology of Heterogeneous materials
대한기계학회 춘추학술대회
2019 .04
적층제조된 알루미늄 합금의 공정변수 및 합금조성이 상대밀도와 기계적 특성에 미치는 영향도 분석
한국분말야금학회지
2023 .06
구상화 메커니즘을 활용한 Ti-6Al-4V 적층성형재의 최종 미세조직 제어
한국정밀공학회 학술발표대회 논문집
2020 .09
0