메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Myeonghwan Choi (Pusan National University) Junghoon Lee (Pusan National University) Hyunbin Nam (Pusan National University) 강남현 (부산대학교) 김명현 (부산대학교) Daewon Cho (Korea Institute of Machinery and Materials)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.26 No.2
발행연도
2020.1
수록면
240 - 247 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Herein, we investigated the weldability and relationship between microstructure and tensile properties in 24 wt% Mn steelwelds and, specifcally, submerged arc welds (SAWs) were produced using these welds for cryogenic applications. The basemetal (BM) and weld metal (WM) exhibited a stacking fault energy (SFE) that maintained a stable austenite phase for 27.1and 17.0 mJ/m2, respectively. Deformation twins were observed after tensile testing of the BM and WM at 298 K. Weld metals using undermatched fllers showed a lower SFE and coarser grain size (~ 86 μm) compared to that of the BM (~ 12 μm). Therefore, the tensile testing at 110 K produced deformation twins and ε-martensite. The formation of ε-martensite withdeformation twins antedated necking during tensile testing and elongation decreased at 110 K. However, the SAWs of highMn steels maintained excellent low-temperature mechanical properties such as elongation, tensile strength, and yield strengthwith values of 20%, 1150 MPa, and 617 MPa, respectively.

목차

등록된 정보가 없습니다.

참고문헌 (41)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0