메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Nabil Chamroune (Univ. Bordeaux) Florence Delange (Schneider Electric SAS) Nathalie Caillault (Schneider Electric SAS) Fabrice Morvan (Toyal Europe SASU) Yongfeng Lu (University of Nebraska-Lincoln) Akira Kawasaki (Tohoku University) Jean‑François Silvain (Univ. Bordeaux)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.26 No.2
발행연도
2020.1
수록면
155 - 167 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
Aluminum (Al) matrix composite materials reinforced with graphite fakes (GF) and pitch-based carbon fbers (CF) werefabricated by solid–liquid phase sintering with a small amount of Aluminum–Silicon eutectic alloy (Al-12 wt%Si). Theamount of Al–Si is optimized for a carbon content of 50 vol% in order to achieve, in the plane of GF reinforcement, a higherthermal conductivity (TC) and a lower coefcient of thermal expansion (CTE) compared to identical composite material fabricated by conventional powder metallurgy route. Al/(GF+CF) composite materials were characterized by scanning electronmicroscopy (SEM), energy-dispersive X-ray microscopy and X-ray tomography in order to highlight the distribution of theAl–Si liquid phase and the formation of a carbon network in the aluminum matrix. A small amount of CF allows to controlthe through-plane CTE without afecting signifcantly the in-plane TC of the Al-C composites. The (GF+CF) mixture andthe solid–liquid phase sintering allow to achieve a TC of 410 W/m K (in-plane direction) and a CTE of 2.4×10−6/K (troughplane direction), which is, for example, applicable for lightweight heat sink material.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0