지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.40 No.4
- 발행연도
- 2021.1
- 수록면
- 581 - 600 (20page)
이용수
초록· 키워드
오류제보하기
The purpose of this research is to identify more efficient and reliable connection methods to design a composite steel/concrete structural system with a focus on sustainability. While using innovative blind bolt shear connectors into substitute for the welded stud brings several benefits regarding constructability and sustainability, research contributions on the high strength blind bolt shear connector are very limited. Therefore, in this study, several push-out test specimens were carried out, in accordance with the Eurocode 4 standards, for both the traditional welded stud and the blind bolt shear connector, to determine the ultimate capacity, ductility, stiffness, stress-strain and load versus slip performance. In addition, finite element analysis has been done on the two types of shear connectors to determine the factors influencing static strength of shear connectors. The feasibility and accuracy of the 3-D finite element model developed in this work was validated by comparing with experimental results obtained from push-out tests. Experimental and finite element modelling results revealed that the blind bolt shear connectors would be an appropriate alternative to the traditional welded stud for sustainable purposes under static loading conditions.
목차
등록된 정보가 없습니다.
참고문헌 (29)
참고문헌 신청
Hossein Agheshlui / 2016 / Tensile Behavior of Groups of Anchored Blind Bolts within Concrete-Filled Steel Square Hollow Sections / Journal of Structural Engineering 142(2):04015125
2014 / AS-1012.9 Methods of testing concrete Compressive strength tests - Concrete, mortar and grout specimens / Standards Australia
2007 / AS-1391 Metallic materials - Tensile testing at ambient temperature / Standards Australia
Balkos, K. D. / 2018 / The static and fatigue behaviour of throughbolt shear connectors in steel-precast composite bridge girders
Huiyong Ban / 2015 / Time-dependent behaviour of composite beams with blind bolts under sustained loads / Journal of Constructional Steel Research 112:196~207
2014 / AS-1012.9 Methods of testing concrete Compressive strength tests - Concrete, mortar and grout specimens / Standards Australia
2007 / AS-1391 Metallic materials - Tensile testing at ambient temperature / Standards Australia
Balkos, K. D. / 2018 / The static and fatigue behaviour of throughbolt shear connectors in steel-precast composite bridge girders
Huiyong Ban / 2015 / Time-dependent behaviour of composite beams with blind bolts under sustained loads / Journal of Constructional Steel Research 112:196~207
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Investigation of pipe shear connectors using push out test
Steel and Composite Structures, An International Journal
2018 .01
-
Shear behavior of a demountable bolted connector in steel-UHPC lightweight composite structures
Structural Engineering and Mechanics, An Int＇l Journal
2022 .03
-
Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation
Steel and Composite Structures, An International Journal
2020 .01
-
Push-out tests on stud shear connectors with constrained structure of steel-concrete composite beams
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Behaviour and design of stainless steel shear connectors in composite beams
Steel and Composite Structures, An International Journal
2023 .01
-
Push out tests on various shear connectors used for cold-formed steel composite beam
Steel and Composite Structures, An International Journal
2022 .02
-
Static behavior of high strength friction-grip bolt shear connectors in composite beams
Steel and Composite Structures, An International Journal
2022 .02
-
Review of stud shear resistance prediction in steel-concrete composite beams
Steel and Composite Structures, An International Journal
2018 .01
-
Experimental and numerical studies on the shear connectors in steel-concrete composite beams at fire and post fire exposures
Steel and Composite Structures, An International Journal
2021 .01
-
Application of ANFIS technique on performance of C and L shaped angle shear connectors
Smart Structures and Systems, An International Journal
2018 .01
-
Experimental study on the hybrid shear connection using headed studs and steel plates
Steel and Composite Structures, An International Journal
2020 .01
-
Behavior and resistance of truss-type shear connector for composite steel-concrete beams
Steel and Composite Structures, An International Journal
2020 .01
-
Static and fatigue behavior of through-bolt shear connectors with prefabricated HFRC slabs
Structural Engineering and Mechanics, An Int＇l Journal
2022 .07
-
Shear transfer mechanism in connections involving concrete filled steel columns under shear forces
Steel and Composite Structures, An International Journal
2018 .01
-
Application of ANFIS technique on performance of C and L shaped angle shear connectors
Smart structures and systems
2018 .01
-
Interfacial shear resistance of angle shear connectors welded to concrete filled U-shaped CFS beam
Steel and Composite Structures, An International Journal
2022 .05
-
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
Steel and Composite Structures, An International Journal
2020 .01
-
단속배치된 캡 형상의 전단연결재의 전단내력에 관한 실험 연구
한국공간구조학회지
2018 .01
-
Distribution of shear force in perforated shear connectors
Steel and Composite Structures, An International Journal
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0