지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.36 No.5
- 발행연도
- 2020.1
- 수록면
- 507 - 519 (13page)
이용수
초록· 키워드
오류제보하기
Double skin composite walls are increasingly popular and have been applied to many safety-related facilities. They come from the concept of composite slabs. Conventional connectors such as shear studs and binding bars were used in previous studies to act as the internal mechanical connectors to lock the external steel faceplates to the concrete core. However, the restraint effects of these connectors were sometimes not strong enough. In this research, a recently proposed unique type of steel truss was employed along the wall height to enhance the composite action between the two materials. Concrete-filled tube columns were used as the boundary elements. Due to the existence of boundary columns, the restraints of steel faceplates to the concrete differ significantly for the walls with different widths. Therefore, there is a need to explore the effect of height-to-width ratio on the structural behavior of the wall. In the test program, three specimens were designed with the height of 3000 mm, the thickness of 150 mm, and different widths, to simulate the real walls in practice. Axial compression was applied by two actuators on the tested walls. The axial behavior of the walls was evaluated based on the analysis of test results. The influences of height-to-width ratio on structural performance were evaluated. Finally, discussion was made on code-based design.
목차
등록된 정보가 없습니다.
참고문헌 (47)
참고문헌 신청
2016 / AISC 360-16, Specification for structural steel buildings / American Institute of Steel Construction
Akiyama, H. / 1991 / A compression and shear loading tests of concrete filled steel bearing wall / Transaction of 11th Structural Mechanics in Reactor Technology(SMiRT-11) :323~328
2010 / GB 50010-2010, Code for design of concrete structures / China Architecture & Building Press
2017 / GB 50017-2017, Standard for classification of steel structures / China Architecture & Building Press
최병정 / 2009 / An experiment on compressive profile of the unstiffened steel plate-concrete structures under compression loading / Steel and Composite Structures, An International Journal 9(6):519~534
Akiyama, H. / 1991 / A compression and shear loading tests of concrete filled steel bearing wall / Transaction of 11th Structural Mechanics in Reactor Technology(SMiRT-11) :323~328
2010 / GB 50010-2010, Code for design of concrete structures / China Architecture & Building Press
2017 / GB 50017-2017, Standard for classification of steel structures / China Architecture & Building Press
최병정 / 2009 / An experiment on compressive profile of the unstiffened steel plate-concrete structures under compression loading / Steel and Composite Structures, An International Journal 9(6):519~534
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Experimental compressive behavior of novel composite wall with different width-to-thickness ratios
Steel and Composite Structures, An International Journal
2020 .01
-
Structural behavior of sandwich composite wall with truss connectors under compression
Steel and Composite Structures, An International Journal
2020 .01
-
Eccentric compressive behavior of novel composite walls with T-section
Steel and Composite Structures, An International Journal
2020 .01
-
Height-thickness ratio on axial behavior of composite wall with truss connector
Steel and Composite Structures, An International Journal
2019 .01
-
Behavior of L-shaped double-skin composite walls under compression and biaxial bending
Steel and Composite Structures, An International Journal
2020 .01
-
Experimental and Analytical Studies for the Size Effect on the Axial Strength of High-Strength Concrete Walls with Various Fire-Damaged Areas
International Journal of Concrete Structures and Materials
2022 .09
-
Flexural performance of composite walls under out-of-plane loads
Steel and Composite Structures, An International Journal
2020 .01
-
Back-to-Back 보강토옹벽의 옹벽폭비에 따른 최적 보강길이비 산정을 위한 수치해석적 연구
한국지반공학회논문집
2020 .12
-
Developments of double skin composite walls using novel enhanced C-channel connectors
Steel and Composite Structures, An International Journal
2019 .01
-
Compressive behavior of rectangular sandwich composite wall with different truss spacings
Steel and Composite Structures, An International Journal
2020 .01
-
Compressive behavior of profiled double skin composite wall
Steel and Composite Structures, An International Journal
2019 .01
-
횡력저항 구조로서 더블월의 접합부에 대한 구조성능 평가
대한건축학회논문집
2020 .06
-
Structural behavior of the stiffened double-skin profiled composite walls under compression
Steel and Composite Structures, An International Journal
2019 .01
-
Behavior and resistance of truss-type shear connector for composite steel-concrete beams
Steel and Composite Structures, An International Journal
2020 .01
-
Numerical studies of steel-concrete-steel sandwich walls with J-hook connectors subjected to axial loads
Steel and Composite Structures, An International Journal
2016 .01
-
Structural performance of reinforced concrete wall with boundary columns under shear load
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Seismic performance test and numerical simulation of prefabricated hydrophobic rock wool board-filled shear wall
Journal of Ceramic Processing Research
2022 .10
-
Corner Steel plate-Reinforced Core Wall System
International journal of high-rise buildings
2019 .01
-
Seismic assessment of slender high rise buildings with different shear walls configurations
Advances in computational design
2016 .01
-
An Estimate of the Yield Displacement of Coupled Walls for Seismic Design
International Journal of Concrete Structures and Materials
2017 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0