지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2020.1
- 수록면
- 92 - 100 (9page)
이용수
초록· 키워드
오류제보하기
The development practice of polymer flooding shows that the injection profile easily inverses during the process of single slug polymer flooding. The low effective or ineffective circulation of abundant injecting water in high permeability layer, low producing degree of low permeability layer and large polymer volume have influenced the sweep efficiency and oil recovery of polymer flooding. In view of these questions, the alternative injection method of various viscosity polymer slugs is studied. This paper explains the theory of enhanced oil recovery of multi-slug polymer alternative injection. The experiment results show that the alternative injection of high and low viscosity polymer slugs has a better effect than single slug polymer flooding. The mobility differences between high-low permeability layers can be effectively reduced. For a multi-layer heterogeneous reservoir, there is an optimal alternative cycle. Reasonable slug size can not only inhibit dominant channel forming in high permeability layer but also can effectively produce low permeability layer and control profile inversion to a certain extent. This provides a technical support for studying the controlling methods of profile inversion.
목차
등록된 정보가 없습니다.
참고문헌 (23)
참고문헌 신청
Cao, R. B. / 2016 / On the mechanics mechanism and evaluation method in fluid absorption profile improvement of polymer flooding alternate injection / Journal of Experimental Mechanics 31(2):231~236
Chen, M. G. / 2017 / Experiments and application of variable-concentration polymer flooding for offshore reservoirs / Oilfield Chemistry 34(2):278~283
Cohen, Y. / 1986 / Polymer retention and adsorption in the flow of polymer solutions through porous media. Paper SPE 12942-PA / SPE Reservoir Engineering Journal 1(2):113~118
Dehghanpour, H. A. / 2009 / A new look at the viscoelastic fluid flow in porous media-a possible mechanism of internal cake formation and formation damage control. SPE 121640 / International Symposium on Oil Field Chemistry
Dukeran, R. / 2018 / Polymer flooding application in Trinidad heavy oil reservoirs. SPE191204-MS / Presented at the SPE Trinidad and Tobago Section Energy Resources Conference held in Port of Spain
Chen, M. G. / 2017 / Experiments and application of variable-concentration polymer flooding for offshore reservoirs / Oilfield Chemistry 34(2):278~283
Cohen, Y. / 1986 / Polymer retention and adsorption in the flow of polymer solutions through porous media. Paper SPE 12942-PA / SPE Reservoir Engineering Journal 1(2):113~118
Dehghanpour, H. A. / 2009 / A new look at the viscoelastic fluid flow in porous media-a possible mechanism of internal cake formation and formation damage control. SPE 121640 / International Symposium on Oil Field Chemistry
Dukeran, R. / 2018 / Polymer flooding application in Trinidad heavy oil reservoirs. SPE191204-MS / Presented at the SPE Trinidad and Tobago Section Energy Resources Conference held in Port of Spain
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Numerical Simulation Study of Two-Phase Slug Flow
한국가시화정보학회 학술발표대회 논문집
2016 .12
-
Quantitative Analysis of Slug Flow Transition
한국가시화정보학회 학술발표대회 논문집
2019 .06
-
Experimental study on commingled injection in multilayered low-permeability reservoir
Geosystem Engineering
2017 .01
-
Experimental Investigation of Slug Flow Transition
한국가시화정보학회 학술발표대회 논문집
2019 .12
-
Study on complex flow law near polymer flooding wellbores and adaptability evaluation of shaped charges
Geosystem Engineering
2016 .01
-
Development of qualitative feature extraction method of slug flow
한국가시화정보학회 학술발표대회 논문집
2017 .11
-
Use of slug test as an In-line technique for the quality control of 3D Concrete Printing
대한토목학회 학술대회
2021 .10
-
Strong Composition Effects in All-Polymer Phototransistors Based on Polymer/Polymer Bulk Heterojunction Layers
한국고분자학회 학술대회 연구논문 초록집
2017 .04
-
미니채널 내 물-에탄올 혼합물로 구성된 단일 액체 슬러그 계면 깨짐 현상에 대한 실험적 연구
한국기계기술학회지
2019 .01
-
하방비등조건에서 두 개의 가열면에서 형성되는 슬러그 기포가 비등열전달 계수에 미치는 영향
한국기계기술학회지
2022 .02
-
Electron-Accepting Conjugated Polymers for All-Polymer Phototransistors and Their Role in Polymer/Polymer Bulk Heterojunctions
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
아크릴 폴리머를 사용한 투수 콘크리트의 물성 비교 평가
한국산학기술학회 논문지
2019 .07
-
Characteristics of waterflood at low rate in low permeability sandstones based on the CT scanning
Geosystem Engineering
2018 .01
-
충격압출 성형공정에서 초기 슬러그 형상에 따른 Al 사각컵의 이어링 영향 분석
금형가공 심포지엄
2015 .08
-
Quantitative and Qualitative Visualization of the Slug Flow in a Horizontal Pipe
한국가시화정보학회 학술발표대회 논문집
2018 .11
-
Determining the Role of Polymer Molecular Weight for High-Performance All-Polymer Solar Cells : Its Effect on Polymer Aggregation and Phase Separation
한국고분자학회 학술대회 연구논문 초록집
2015 .04
-
Polymer Electrolytes as a Cathode Buffer Layer for Polymer Solar Cells
한국고분자학회 학술대회 연구논문 초록집
2015 .04
-
Enhanced Mechanical Properties of Polymer Nanocomposites Using Dopamine-Modified Polymers at Nanoparticle Surfaces in Very Low Molecular Weight Polymers
한국고분자학회 학술대회 연구논문 초록집
2018 .10
-
All-Polymer Phototransistors Based on Polymer/Polymer Bulk Heterojunctions
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
다중적층 소재 레이저용접 인자별 열영향 해석
한국기계가공학회지
2021 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0