메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Sengjun Jo (Kangwon National University) Hyeonjun Kim (Kangwon National University) Kuduck Kwon (Kangwon National University)
저널정보
대한전자공학회 JOURNAL OF SEMICONDUCTOR TECHNOLOGY AND SCIENCE Journal of Semiconductor Technology and Science Vol.21 No.5
발행연도
2021.10
수록면
364 - 372 (9page)
DOI
10.5573/JSTS.2021.21.5.364

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, a 2.4 GHz Bluetooth low energy (BLE) receiver front-end with a new inphase/quadrature (I/Q) down-conversion active mixer employing a current-reused quadrature transconductor is presented for low-power low-voltage Internet of Things applications. In the proposed I/Q mixer, the current-bleeding circuit, whose main role is to reduce the flicker noise in the switching stage, enhances the overall transconductance and provides quadrature signals with the main quadrature transconductor. Consequently, it improves the conversion gain and noise figure of the mixer without additional power consumption. The proposed BLE receiver front-end consists of a current-reused push-pull low-noise amplifier and an I/Q mixer with a current-reused quadrature transconductor. Simulated in a 65 nm CMOS process, the designed receiver front-end achieves a noise figure of 3.3 dB, conversion gain of 37.6 dB, and input-referred third-order intercept point of -22.73 dBm. It draws a bias current of 1 mA from a nominal supply voltage of 1 V. The active die area is 0.5 mm².

목차

Abstract
I. INTRODUCTION
II. A NEW I/Q DOWN-CONVERSION MIXER ARCHITECTURE WITH CURRENT-REUSED QUADRATURE TRANSCONDUCTOR
III. CIRCUIT IMPLEMENTATION
IV. SIMULATION RESULTS
V. CONCLUSIONSS
REFERENCES

참고문헌 (21)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-569-002167568