영 · 유아용 침대는 아이의 성장에 따라 변화되어야 한다. 성장에 따라 신체적 특성, 수면 방식 등이 변화되기 때문이다. 하지만 보호자들은 잦은 침대 교체로 인한 피로감과 경제적 부담감으로 인해 불편함을 감수하며 영 · 유아의 발달사항과 맞지 않는 침대를 사용하는 경우가 많다. 이는 영 · 유아의 수면 습관에 좋지 않은 영향을 주고, 낙상, 끼임 등의 사고를 발생시킬 수 있으며, 보호자에게는 육아로 인한 신체적 피로감을 발생시킨다. 본 연구는 영 · 유아의 발달과정에 따라 형태를 변화시켜 지속적으로 활용할 수 있는 침대의 디자인을 제안하였다. 사전에서 정의하는 기준을 토대로, 0세부터 6세까지의 아이를 영 · 유아로 지정하였고, 문헌 연구를 통해 영 · 유아의 발달사항에 맞게 침대의 형태가 요람형 침대 - 범퍼형 침대 - 아동용 침대로 변화되어야 한다는 것을 파악하였다. 또한 서울 및 경기도의 영 · 유아 보호자 108명을 대상으로 하는 설문조사를 통해 사용하는 침대의 종류 및 변경 방식, 영 · 유아 침대선택 기준 및 희망하는 개선방안에 대해 알아보았다. 전문가가 제안하는 침대의 종류와 실제 사용되는 침대의 종류의 상이점을 살펴보고, 그 이유가 무엇인지를 파악하여 안전하고 편리하게 사용할 수 있는 침대를 디자인하고자 하였다. 본 연구에서 제안하는 침대의 디자인은 침대의 구성 요소들의 해체와 조립을 통해 침대의 형태를 변화시키는 것을 골자로 한다. 태어나서 가장 먼저 사용하게 되는 요람형 침대의 사용이 끝나면, 가드, 매트 받침 등의 구성 요소들을 분해하여, 침대 프레임에 헤드 및 범퍼 가드로 재조립하여 범퍼형 침대로 사용할 수 있다. 가드에는 가드용 쿠션을 끼워 부딪침으로 인한 사고 등을 예방할 수 있고, 원목 재질의 프레임이 사용되었기 때문에, 잦은 넘어 다님으로 인한 가드의 변형을 방지할 수 있다. 범퍼침대의 역할이 끝나면 가드를 제거하고, 싱글침대용 매트리스를 올려 아동용 침대로 활용할 수 있다. 이를 통해 침대의 교체로 인한 부담감을 줄일 수 있고, 생산에서 폐기로 이어지는 사이클의 반복을 줄여 환경의 오염을 줄일 수 있다. 이 연구를 통해 교체주기가 짧은 제품들을 보다 길게 활용할 수 있는 방안을 고민하고 제작할 수 있게 되기를 바란다.
Beds for infants and toddlers should be changed according to the growth of the child. This is because physical characteristics and sleeping patterns change as they grow. However, caregivers feel fatigue and financial burden due to frequent bed changes. For this reason, there are many cases of using a bed that does not match the developmental needs of infants and toddlers. The use of such a bed adversely affects the sleeping habits of infants and toddlers, and may cause accidents such as falls and is trapped. In addition, it causes physical fatigue for caregivers due to parenting. This study proposed a design of a bed that can be used continuously by changing the shape according to the developmental process of infants and toddlers. Based on the criteria defined in the dictionary, children from 0 to 6 years old were designated as infants and toddlers. Through a literature study, it was found that the bed should be changed to a cradle type bed - a bumper type bed - a children’s bed according to the development of infants and toddlers. In addition, a survey was conducted on 108 caregivers of infants and toddlers residing in Seoul and Gyeonggi-do, and the types and changes of beds, criteria for selecting beds for infants and toddlers, and ways to hope for improvement were investigated. This study tried to design a bed that can be used safely and conveniently by examining the parts that are different from those suggested by experts and actually used, and understanding the reason. The main content of the bed design proposed in this study is to change the shape of the bed through disassembly and assembly of the bed components. When the cradle type bed, which is used first after birth, is finished, the components such as the guard and mat support are disassembled and reassembled into the bed frame as a head and bumper guard to be used as a bumper type bed. The guard is covered with a cushion for the guard to prevent accidents caused by bumping, and since the frame made of solid wood is hard, it is possible to prevent deformation of the guard due to frequent crossing. When you are finished using the bumper bed, you can remove the guard and put a mattress for a single bed to use as a children’s bed. Through this, the burden of changing the bed can be reduced, By reducing the repetition of the cycle from production to disposal, pollution of the environment can be reduced. It is hoped that through this study, it will be possible to consider and manufacture ways to utilize products with shorter replacement cycles for a longer period of time.