메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김병준 (Seoul National University of Science & Technology) 김용성 (Seoul National University of Science & Technology) 주기태 (Seoul National University of Science & Technology) 김준현 (Seoul National University of Science & Technology) 박익근 (Seoul National University of Science & Technology) 이재용 (Hanchung R.F.) 양수원 (Hanchung R.F.)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.30 No.4
발행연도
2021.8
수록면
269 - 277 (9page)
DOI
10.7735/ksmte.2021.30.4.269

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, batch-type demagnetization heat-treatment conditions were studied via computational simulations to reuse waste NdFeB-based permanent magnets. t room temperature, the time delay for the Nd magnet specimen to reach the target temperature in the furnace There was a delay in the time required for the temperature of the specimen and the furnace temperature to reach the target temperature. This delay time was observed to decrease from 27 min to 12 min as the heat treatment temperature increased from 100℃ to 400℃. The magnetic fluxes of the Nd magnets decreased with an increase in the heat treatment temperatures, and the magnets demagnetized at 300℃. The completely demagnetized magnet was fully remagnetized when more than 6000 J of magnetizing energy was applied. Further, by analyzing the surface soundness of the demagnetized Nd magnet, it was confirmed that the magnet could be reused.

목차

ABSTRACT
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-003-001938773