지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2021.5
- 수록면
- 60 - 60 (1page)
이용수
초록· 키워드
오류제보하기
The electrochemical properties of a friction stir processed (FSPed) equiatomic CrMnFeCoNi high-entropy alloy (HEA) is investigated in an aerated 0.5 M Na<sub>2</sub>SO<sub>4</sub> electrolyte solution at room temperature. The microstructural analysis reveals a highly refined stir zone (SZ) with an average grain size that decreases from the top region of the SZ to the bottom region of the SZ (also known as shear processed zone; SPZ). However, the region below the SPZ, (i.e., below the plunge depth) experienced an increase in average grain size and dislocation densities compared to the other regions. There is no secondary phase observed in the FSPed region, however, the microstructural evolution in the FSPed region affects the electrochemical behavior of the HEA. Cr<sub>2</sub>O<sub>3</sub> passive layer is observed to form o ... 전체 초록 보기
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Synthesis of High Entropy Alloy for Surface Modification by Friction Stir Process: Recent Advances and Future Directions
Metals and Materials International
2024 .05
-
Effect of Initial Grain Size on Friction Stir Weldability for Rolled and Cast CoCrFeMnNi High‑Entropy Alloys
Metals and Materials International
2020 .01
-
고엔트로피 합금의 연구동향
한국분말야금학회지
2019 .01
-
Enhancing Tensile Properties of Wire-Arc Additively Manufactured Ti-6Al-4 V Deposits Via Cryogenic Vaporised Ar Shielding/Cooling
Metals and Materials International
2023 .03
-
Compressive Deformation Behavior of CrMnFeCoNi High-Entropy Alloy
Metals and Materials International
2016 .01
-
Explosive Welding and Friction Stir Welding/Processing of Multi-Principal Element Alloys
Metals and Materials International
2024 .03
-
하이드록시 에틸아크릴레이트가 광접착 수지 물성에 미치는 영향
폴리머
2017 .05
-
Effect of Ascorbic Acid on the Pitting Resistance of 316L Stainless Steel in Synthetic Tap Water
Metals and Materials International
2016 .01
-
Prediction of tensile strength degradation of corroded steel based on in-situ pitting evolution
Steel and Composite Structures, An International Journal
2023 .02
-
Tuning the Microstructure and Mechanical Properties of Cold Sprayed Equiatomic CoCrFeMnNi High-Entropy Alloy Coating Layer
Metals and Materials International
2021 .01
-
Corrosion evaluation of a newly developed high-strength steel in marine environments
Journal of Advanced Marine Engineering and Technology (JAMET)
2016 .12
-
Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer
Structural engineering and mechanics : An international journal
2018 .01
-
마찰교반공정을 통한 강재의 개질 영역에서의 미세조직에 미치는 합금원소의 영향
한국재료학회지
2015 .01
-
Alloying Behavior and Properties of FeSiBAlNiCox High Entropy Alloys Fabricated by Mechanical Alloying and Spark Plasma Sintering
Metals and Materials International
2018 .01
-
Resistance to Pit Formation and Pit Growth for Different Tempers of AA2024 Aluminium Alloy in Presence of Benzotriazole
Metals and Materials International
2020 .01
-
선택적 레이저 용융법으로 제조된 CoCrFeMnNi계 고엔트로피합금의 미세조직 및 기계적 물성 연구 동향
한국분말야금학회지
2022 .04
-
The Corrosion Mechanism of TAC (Tri-Acetyl-Cellulose) Process and Set-up Material Selection Guide with Corrosion Testing
한국신뢰성학회 학술대회논문집
2016 .05
-
A study on the correlation between microstructure and mechanical/galvanic corrosion behaviors of friction stir butt welded joint of steel and aluminum alloys
한국소성가공학회 학술대회 논문집
2019 .10
-
Pitting Corrosion Behavior of CUSTOM 450 Stainless Steel Using Electrochemical Characterization
Metals and Materials International
2021 .11
-
부식전류를 이용한 부식촉진시험 조건별 대기부식성 등급 평가 방법의 유효성 검증
한국강구조학회 학술대회 발표집
2021 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0