메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
S. M. Iqbal S. Zainal (Universiti Putra Malaysia) Farzad Hejazi (Universiti Putra Malaysia) Raizal S. M. Rashid (Universiti Putra Malaysia)
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.15 No.3
발행연도
2021.5
수록면
345 - 372 (28page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The knee beam–column joint is a critical location in a Reinforced Concrete (RC) structure particularly when subjected to earthquake vibrations. The current structural design codes dictate the use of high amounts of steel reinforcements in the frame joint to manage large strain demands in seismic-prone regions. However, these codes could result in the congestion of steel reinforcements in the limited joint area which can consequently produce numerous construction complications. This study aims to improve the structural performance of Knee Joint (KJ) by reducing the load induced to the embedded steel reinforcements during seismic vibrations. Hence, this study attempted to develop a Hybrid Fiber Reinforced Concrete (HyFRC) by combining multiple synthetic fibers to be introduced onto KJ. Six KJ specimens were cast using five developed HyFRC materials and one Control specimen to be experimentally tested under lateral cyclic loading. The results indicated significant improvements for the HyFRC KJ specimens particularly in energy dissipation capacity, stiffness degradation rate, displacement ductility toughness, steel reinforcement strain and hysteretic behavior. A total of six Finite Element (FE) KJ models were developed using the HyFRC materials to verify the results from the experimental testing. The accuracy of the proposed FE models resulted in average percentage differences of 25.89% for peak load, 3.45% for peak load displacement and 0.18% for maximum displacements from the experimental data. In conclusion, this study developed HyFRC materials that are beneficial in providing cost-efficient alternatives to Reinforced Concrete (RC) KJ structures in areas with low to moderate level of seismic risks.

목차

Abstract
1 Introduction
2 Proposed Synthetic Hybrid Fiber Reinforced Concrete
3 Details of knee beam-column joint
4 Experimental test procedure
5 Experimental Testing Results
6 Numerical Simulation
7 Concluding remarks
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-532-001749232