메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Sang-Min Lee (University of Ulsan) Jun Choi (Korea Institute of Industrial Technology)
저널정보
한국진공학회(ASCT) Applied Science and Convergence Technology Applied Science and Convergence Technology Vol.30 No.1
발행연도
2021.1
수록면
29 - 33 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The intensity and uniformity of the dielectric barrier discharge (DBD) were studied via fabrication. The DBD can be achieved by various methods using dielectrics and electrodes; however, depending on the device configuration and fabrication method, unnecessary air gaps may occur between the dielectric and electrode. The air gap increases the breakdown voltage for plasma generation, thereby affecting the characteristics of the DBD. In this study, an inner electrode was formed on the surface of a dielectric by the silver mirror reaction to eliminate the air gap; in this technique, silver is deposited on the dielectric surface by a reducing organic compound. The DBD images of the silver-coated inner electrode were investigated using an intensified charge coupled device (ICCD) camera and the OpenCV library of Python for quantitatively evaluating performance measures such as intensity and uniformity. In addition, the reactive oxygen species (ROS) generated by DBD were measured with a band-pass filter and the ICCD camera. When the DBD device was driven by same voltages, the silver-coated inner electrode showed improved intensities and uniformities of up to 7.98 and 1.75 times, respectively. Moreover, the ROS intensities and uniformities were improved by up to 57.8 and 9.27 times, respectively.

목차

ABSTRACT
1. Introduction
2. Experimental details
3. Results and discussion
4. Conclusions
References

참고문헌 (13)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0