메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
방혜진 (한국기계연구원) 주용현 (지엠테크니컬센터코리아) 김현남 (지엠테크니컬센터코리아) 신현식 (지엠테크니컬센터코리아) 박규종 (국민대학교) 조종두 (인하대학교)
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제29권 제3호
발행연도
2021.3
수록면
257 - 264 (8page)
DOI
10.7467/KSAE.2021.29.3.257

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Additive manufacturing via 3D printing is a new processing technology that can be used in many areas to address the shortcomings of conventional cutting manufacturing. However, the dimensional accuracy of the output math data and the drawbacks of additive manufacturing, including differences in the material properties of the placement method, are among the issues that must be studied in the future. In this paper, several manufacturers of 3D printers that were widely used in the automotive industry were selected, and several output methods and materials were chosen among domestically produced printers. Based on the arrangement method, standard specimens were manufactured in compliance with ASTM, and the mechanical properties of each orthotropic material were measured. Then, based on the material, stiffness was quantitatively compared, and a volume reduction model was presented through an optimization analysis.

목차

Abstract
1. 서론
2. 물성 실험
3. 검증 모델에 대한 구조해석 및 실험
4. 해석 결과
5. 결론
References

참고문헌 (11)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0