메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
바트세이칸뭉크밧 (창신대학교) 김영수 (창신대학교) 송민수 (창신대학교) 정의국 (창신대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2020년 학술대회
발행연도
2020.12
수록면
1,708 - 1,713 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The experimental work was conducted on heat pipe connecting the evaporator and condenser end with a liquid bypass line. The liquid bypass line was designed to extend the maximum thermal of the heat pipe. The heat pipe with a total length of 750 mm are made of aluminum material. the evaporator and condenser are the same as 200 mm in length, and the adiabatic length is 350 mm. The inner diameters of the heat pipe and bypass line were 15.88 mm and 6.35 mm, respectively. Acetone was used as working fluid. In this experimental work, the effect of the bypass line on heat transfer performance of the heat pipe is to be presented. The maximum thermal load of the heat pipes with and without the liquid bypass line were analyzed and compared with each other, under tilt angles of 0° to 20°. Typical results showed that the maximum thermal load was increased by approximately 35.5% on horizontal arrangement.

목차

Abstract
1. 서론
2. 실험장치 및 과정
3. 결과 및 토론
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0