메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김성은 (중앙대학교) 송용우 (중앙대학교) 박진철 (중앙대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제33권 제1호
발행연도
2021.1
수록면
25 - 30 (6page)
DOI
10.6110/KJACR.2021.33.1.025

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, we compared standards for improving the performance of pipes based on their location to better the energy efficiency of buildings. We performed a simulated comparative analysis by measuring the temperature of each installed pipe and applying the insulation-thickness standard used at home and abroad. The pipe shaft located indoors maintained an almost constant temperature, but the pipe installed in an underground parking space was greatly affected by the outside temperature. In winter, the average temperatures of the inside pipe shaft and the one on the first-basement floor were 25.5℃ and 3.3℃, respectively. The simulation analysis for each insulation-thickness criterion showed that the heat loss decreased by 1.7~2.2% when the overseas standard was applied. The analysis of the two installation locations showed that the average heat loss of the pipe installed in the underground parking space was 36.7% greater than that of the pipe that was installed indoors.

목차

Abstract
1. 연구배경 및 목적
2. 온수배관 설치 위치에 따른 온도 측정
3. 시뮬레이션 개요 및 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0