메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Sang-Yong Park (Chosun University) Dong-Chul Chung (Jeonbuk National University) Hyo-Sang Choi (Chosun University)
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.25 No.4
발행연도
2020.12
수록면
491 - 495 (5page)
DOI
10.4283/JMAG.2020.25.4.491

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Permanent magnets are currently attracting much attention as they are used in various application devices requiring high magnetic force. There are many types of permanent magnets with different properties, and they need to be tested for suitability for the applied devices. Sintered NdFeB permanent magnets have a large coercive force and are used in a variety of application systems. In particular, they are being used in circuit breakers to protect the DC transmission and distribution systems, which are actively being developed now. DC maintains a constant current value because it does not have a frequency. Thus, it is very difficult to interrupt large transient currents when an accident occurs. Therefore, a new type of induction needle and a permanent magnet near a mechanical break contact were combined. This induction needle is serially connected to a ground wire. This new breaking technique extinguishes the arch that occurs between the contacts by pushing it to the ground using an induction needle. The permanent magnet applied here, however, must be strong against a high-temperature arc that occurs quickly, and must generate a high magnetic force. Simulations were conducted with FEM (finite element method) and TDM (time difference method) using Maxwell, an electronic analysis program, and a permanent magnet that is appropriate for use as a component of a circuit breaker was selected. Consequently, it was found that the use conditions of permanent magnets varied by the arch generated in the mechanical circuit breaker.

목차

1. Introduction
2. The Principle and Mechanism of Arc-induced DC Circuit Breaker
3. Design of the Simulation for the Arc-induced DC Circuit Breaker Applying the Magnets
4. Results of the Simulation for the Arc-induced DC Circuit Breaker without the Magnets
5. Results of the Simulation for the Magnets
6. Results of the Simulation for the Arc-induced DC Circuit Breaker with the Magnets
7. Numerical Analysis
8. Conclusions
References

참고문헌 (5)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0