메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김경원 (Wonkwang University) 김용갑 (Wonkwang University) 박대희 (Wonkwang University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제34권 제9호
발행연도
2020.9
수록면
7 - 11 (5page)
DOI
10.5207/JIEIE.2020.34.9.007

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The accident of XLPE power cables occurs mainly in the junction area, and most of the failure causes contamination, air gap, and protrusion of insulators, and the concentration of the field leads to the failure of insulation. Partial discharge is caused by these factors, and when it is observed, it is a method of detecting an insulator abnormality. However, because the insulation breakdown of power cables does not always occur and is difficult to predict, for this reason, various studies of power cable insulation diagnosis techniques have been studied all over the world. In order to measure the partial discharge, the sensor is installed and optimized considering the location. Capacitive sensor is installed at ground line to measure capacitance. Low frequency signal does not pass through semiconducting layer, but high frequency signal passes. In this paper, we propose a method to improve the reliability by reviewing and extending the frequency band of each sensor and comparing and analyzing the data.

목차

Abstract
1. 서론
2. 이론고찰
3. 본론
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0