메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Wang, Ni (Dong Hua University) Zhang, Jianchun (The Quartermaster Research Institute, The General Logistics Department, The CPLA) Lai, Kan (Xi'an Polytechnic University) Sun, Run-Jun (Xi'an Polytechnic University)
저널정보
한국섬유공학회 Fibers and Polymers Fibers and polymers 제8권 제3호
발행연도
2007.1
수록면
284 - 288 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The possibility of producing blended yam by using one spinneret is analyzed theoretically, especially the formation of differences in linear density and shrinkage between the monofils. Under the same spinning pressure, the die-spinning nozzles with different diameters are used to produce the differences in the flow of the melt. According to the hagen-poseuille equation for streamline flow in cylinder pipe, the volumetric flow rate and the mean melt speed of die-spinning nozzles increase with the increase of diameters. Under the conditions that the winding speeds are the same, so that the effective draw ratios decrease with the increase of the die-spinning nozzles diameters. Then, the filament formed through the die-spinning nozzle with large diameter is coarse and have a low birefringence. On the contrary, the filament formed through the die-spinning nozzle with small diameter is fine and have a high birefringence. The differences between the filament in structure and property could be acquired by one spinneret.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0