지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2009.1
- 수록면
- 6 - 9 (4page)
이용수
초록· 키워드
오류제보하기
The crack in a J85 engine V.G. actuator arm shaft for a bell crank on the engine compressor was investigated. The crack was observed in twenty two shafts during the inspection of 238 shafts. The failure analysis of shaft cracks was performed by chemical composition analysis using ICP(Inductively Coupled Plasma) and by fracture surface and microstructure analysis using FE-SEM and optical microscope. The crack initiated from the top and bottom and propagated to the center along the grain boundaries. From the chemical composition analysis, the fractography of the fracture surface and the microstructure, it was found that the failure mechanism of the shafts is the inclusion-related intergranular decohesion crack. The inclusion was found out from MnS particle by EDS(Energy Dispersive Spectroscopy). The crack initiated MnS inclusion in the grain boundary and propagated with the increase of applied shear stress during long operation. In order to prevent the fracture, NDI(Nondestructive inspection) is needed periodically as recommended.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
A SIMPLE METHOD FOR IDENTIFYING THE LOCATION OF A CRACK IN A ROTATING SHAFT
한국소음진동공학회 국제학술발표논문집
2008 .07
-
A non-destructive method for elliptical cracks identification in shafts based on wave propagation signals and genetic algorithms
Smart structures and systems
2012 .01
-
Bi-spectrum for identifying crack and misalignment in shaft of a rotating machine
Smart structures and systems
2006 .01
-
Crack identification in short shafts using wavelet-based element and neural networks
Structural engineering and mechanics : An international journal
2009 .01
-
An investigation into the effects of voids, inclusions and minor cracks on major crack propagation by using XFEM
Structural engineering and mechanics : An international journal
2014 .01
-
비틀림이 작용하는 축 내의 경사진 표면 균열의 응력확대계수
한국자동차공학회논문집
1999 .01
-
Development of ECT Measurement System for Inspection of Surface Crack in Shafts
한국생산제조학회 학술발표대회 논문집
2015 .10
-
Estimation of a Mass Unbalance Under the Crack on the Rotating Shaft
Transaction on Control, Automation and Systems Engineering
2000 .12
-
탄성 유한요소해석을 이용한 동일 평면상에 존재하는 다중 표면균열의 균열상호작용 평가
대한기계학회 춘추학술대회
2008 .05
-
The investigation crack problem through numerical analysis
Structural engineering and mechanics : An international journal
2016 .01
-
피로크랙 진전과정에서의 크랙열림점 평가에 관한 연구 ( I ) - 실험에 의한 크랙열림점 측정 -( A Study on Evaluation of Crack Opening Point in Fatigue Crack Propagation Course ( I ) - Measurement of Crack Opening Point by Experiment - )
대한기계학회 논문집
1991 .05
-
변위센서를 이용한 적응적 PID제어기반 자동차 변속기 샤프트 교정시스템
센서학회지
2010 .01
-
ON CRACK INTERACTION EFFECTS OF IN-PLANESURFACE CRACKS USING ELASTIC AND ELASTIC-PLASTICFINITE ELEMENT ANALYSES
Nuclear Engineering and Technology
2010 .01
-
Al 2024-T3재의 Crack Opening Point의 평가에 관한 연구
한국안전학회지
2004 .01
-
분포 크랙들 사이에서의 상호 간섭에 관한 연구
한국자동차공학회논문집
2005 .11
-
다중 표면균열의 균열형상 이상화 기준 적용성 평가
대한기계학회 춘추학술대회
2009 .04
-
Elastic-plastic fracture of functionally graded circular shafts in torsion
Advances in materials research : AMR
2016 .01
-
이종재료 계면균열의 균열진전거동에 관한 연구
한국기계기술학회지
2013 .01
-
Time domain identification of multiple cracks in a beam
Structural engineering and mechanics : An international journal
2010 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0