지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 동향자료
- 저자정보
- 발행연도
- 2010.1
- 수록면
- 176 - 183 (8page)
이용수
초록· 키워드
오류제보하기
PAN precursor fibers were produced via wet-spinning process, and effects of polymerization and spinning processes, especially the stretching process, were investigated on mechanical properties and micro-morphologies of precursor fibers. An increase in molecular weight, dope solid and densification and a decrease in surface defects were possible by controlling polymerization temperature, the number of heating rollers for densification and the jet stretch ratio, which improved the mechanical properties of precursor fibers. The curves for strength, modulus, tensile power and diameter as a function of stretch ratio can be divided into three stages: steady change area, little change area and sudden change area. With the increase of stretch ratio, the fiber diameter became smaller, the degree of crystallization increased and the structure of precursor fibers became compact and homogeneous, which resulted in the increase of strength, modulus and tensile power of precursor fibers. Empirical relationship between fiber strength and stretch ratio was studied by using the sub-cluster statistical theory. It was successfully predicted when the strengths were 0.8 GPa and 1.0 GPa under a certain technical condition, the corresponding stretch ratio of the fiber were 11.16 and 12.83 respectively.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
팽윤습열연신에 의한 아크릴섬유의 고강도화에 관한 연구
자연 과학 논문집 : 배재대학 첨단과학연구소
1995 .01
-
Effects of positive and negative stretching on the structure and properties of polyacrylonitrile fibers in the pre-oxidation process
Carbon letters
2011 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(II) - 공정변수가 복합재의 기계적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
Carbon Fibers (I): General Understanding and Manufacturing Techniques of Carbon Fibers
Carbon letters
2008 .01
-
Preparation and thermal properties of polyethylene-based carbonized fibers
Carbon letters
2015 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(I) - 공정변수가 복합재의 물리적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
Effect of Process Condition on Tensile Properties of Carbon Fiber
Carbon letters
2011 .01
-
Effect of additional heat-treatment temperature on chemical, microstructural, mechanical, and electrical properties of commercial PAN-based carbon fibers
Carbon letters
2011 .01
-
Conversion of Carbon Fiber into Silicon Carbide Fiber by Pack-Cementation
Carbon science
2000 .01
-
Fabrication and Applications of Carbon Nanotube Fibers
Carbon letters
2012 .01
-
Improvement of Thermal Stability of Electrospun PAN Fibers by Various Additives
Carbon letters
2008 .01
-
Manufacturing and characteristics of PAN-based composite carbon fibers containing cellulose particles
Carbon letters
2015 .01
-
Stabilization of pitch-based carbon fibers accompanying electron beam irradiation and their mechanical properties
Carbon letters
2015 .01
-
목질(木質)과 비목질계(非木質系) 섬유(纖維)를 활용한 복합재(複合材) 연구(硏究) - 폴리프로필렌의 섬유장(纖維長)과 공정변수(工程變數)의 영향(影響)을 중심(中心)으로 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
Pitch based carbon fibers for automotive body and electrodes
Carbon letters
2014 .01
-
An overview of new oxidation methods for polyacrylonitrile-based carbon fibers
Carbon letters
2015 .01
-
Characterization and Fabrication of Chemically Activated Carbon Fibers with Various Drying Temperatures using OXI-PAN Fibers
Carbon science
2007 .01
-
Microstructural changes of polyacrylonitrile-based carbon fibers (T300 and T700) due to isothermal oxidation (1): focusing on morphological changes using scanning electron microscopy
Carbon letters
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0