지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 동향자료
- 저자정보
- 발행연도
- 2009.1
- 수록면
- 202 - 207 (6page)
이용수
초록· 키워드
오류제보하기
Pitch-based carbon fiber tows were prepared from naphtha cracking bottom oil by reforming and carbonization. The relationship between exothermic heat and carbon contents of the fiber was investigated by changing the carbonization conditions. The carbon contents and the crystallinities of isotropic pitch-based carbon fibers were 86.8~93.8 wt% and 33.7~40.1%, respectively, which were linearly proportional to the increase of carbonization temperature from 700 to $1000^{\circ}C$. The exothermic heat (temperature increase) of fiber tows was measured in a short time, which was also linearly proportional to the increase of carbon contents due to the increase of crystallinity, even though the crystallinity was low. Therefore, the carbon contents or carbonization degree of fibers can rapidly and indirectly be estimated by measuring the surface temperature increase of fibers.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Preparation and characterization of isotropic pitch-based carbon fiber
Carbon letters
2013 .01
-
Carbon Fibers (I): General Understanding and Manufacturing Techniques of Carbon Fibers
Carbon letters
2008 .01
-
Pitch based carbon fibers for automotive body and electrodes
Carbon letters
2014 .01
-
Effect of Post-Heat-Treatment on Various Characteristics of Commercial Pitch-Based Carbon Fibers
Carbon science
2007 .01
-
Molecular structure effects of the pitches on preparation of activated carbon fibers from electrospinning
Carbon letters
2011 .01
-
Microstructural changes of polyacrylonitrile-based carbon fibers (T300 and T700) due to isothermal oxidation (1): focusing on morphological changes using scanning electron microscopy
Carbon letters
2016 .01
-
Mechanical Properties and Oxidation Behaviors of Boron Oxide Implanted Carbon Fibers
Carbon science
2000 .01
-
Effect of additional heat-treatment temperature on chemical, microstructural, mechanical, and electrical properties of commercial PAN-based carbon fibers
Carbon letters
2011 .01
-
Fabrication of carbon fiber SMC composites with vinyl ester resin and effect of carbon fiber content on mechanical properties
Carbon letters
2017 .01
-
Conversion of Carbon Fiber into Silicon Carbide Fiber by Pack-Cementation
Carbon science
2000 .01
-
Manufacturing and characteristics of PAN-based composite carbon fibers containing cellulose particles
Carbon letters
2015 .01
-
Effect of carbonization temperature and chemical pre-treatment on the thermal change and fiber morphology of kenaf-based carbon fibers
Carbon letters
2011 .01
-
Role of Interface on the Development of Microstructure in Carbon-Carbon Composites
Carbon science
2002 .01
-
Effect of carbonization temperature on crystalline structure and properties of isotropic pitch-based carbon fiber
Carbon letters
2017 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(II) - 공정변수가 복합재의 기계적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(I) - 공정변수가 복합재의 물리적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
Carbon Fibers (II): Recent Technical Trends and Market Prospects of Carbon Fibers
Carbon letters
2008 .01
-
Pore structure control of activated carbon fiber for CO gas sensor electrode
Carbon letters
2016 .01
-
Preparation of Partial Mesophase Pitch-based Carbon Fiber from FCC-DO
Carbon science
2001 .01
-
The effect of the spinning conditions on the structure of mesophase pitch-based carbon fibers by Taguchi method
Carbon letters
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0