지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 485 - 503 (19page)
이용수
초록· 키워드
오류제보하기
To investigate the nonlinear aerostatic stability of the Hutong cable-stayed rail-cum-road bridge with ultra-kilometer main span, a FEM bridge model is established. The tri-component wind loads and geometric nonlinearity are taken into consideration and discussed for the influence of nonlinear parameters and factors on bridge resistant capacity of aerostatic instability. The results show that the effect of initial wind attack-angle is significant for the aerostatic stability analysis of the bridge. The geometric nonlinearities of the bridge are of considerable importance in the analysis, especially the effect of cable sag. The instable mechanism of the Hutong Bridge with a steel truss girder is the spatial combination of vertical bending and torsion with large lateral bending displacement. The design wind velocity is much lower than the static instability wind velocity, and the structural aerostatic resistance capacity can meet the requirement.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Aerostatic load on the deck of cable-stayed bridge in erection stage under skew wind
Wind & structures
2016 .01
-
오리피스 공기베어링의 설계변수 분석
한국정밀공학회 학술발표대회 논문집
2018 .10
-
Numerical investigation on the wind stability of super long-span partially earth-anchored cable-stayed bridges
Wind & structures
2015 .01
-
IT 부품 가공을 위한 공기베어링 스핀들 정/동 특성 해석에 관한 연구
한국정밀공학회 학술발표대회 논문집
2019 .05
-
70,000 r/min급 공기정압 베어링 주축의 가공 성능 평가
한국생산제조학회 학술발표대회 논문집
2015 .04
-
공기정압 베어링 장착 70,000r/min 고속주축 개발
한국생산제조학회 학술발표대회 논문집
2015 .10
-
Nonlinear dynamic performance of long-span cable-stayed bridge under traffic and wind
Wind & structures
2015 .01
-
공기베어링 회전계의 설계변수와 회전계 특성 관계에 관한 연구
한국생산제조학회 학술발표대회 논문집
2015 .04
-
Analysis of tool point dynamics of an ATC type aerostatic spindle
한국생산제조학회 학술발표대회 논문집
2024 .07
-
공기정압안내면의 공기 압력 편차 감소로 인한 가공면의 품질 변화
한국정밀공학회 학술발표대회 논문집
2016 .10
-
The aerostatic response and stability performance of a wind turbine tower-blade coupled system considering blade shutdown position
Wind & structures
2017 .01
-
Study on Thermal Deformation of High-pressure Aerostatic Thrust Bearing in Uneven Temperature Field
대한기계학회 춘추학술대회
2022 .11
-
Aerodynamic stability of iced stay cables on cable-stayed bridge
Wind & structures
2016 .01
-
Structural behavior of cable-stayed bridges after cable failure
Structural engineering and mechanics : An international journal
2016 .01
-
Study on Analysis and Experimental Validation of Wind Torque for Design of Drive Unit of Radar System
Journal of the Korean Society for Precision Engineering
2017 .09
-
Experimental Investigation for Rotational Error Motion Simulation of Inherently Compensated Aerostatic Journal Bearing
Journal of the Korean Society for Precision Engineering
2015 .02
-
Enhancement of tool point FRF estimation on multipurpose aerostatic spindle by compensation of contact parameter
한국생산제조학회 학술발표대회 논문집
2022 .05
-
Development of automatic system for evaluating the stress redistribution in structural members of a steel cable-stayed bridge due to cable stress relaxation
Steel and Composite Structures, An International Journal
2022 .09
-
Dynamic Finite Element Modeling of Transmission Lines Under Wind Loads Considering Geometric Nonlinearity
대한기계학회 춘추학술대회
2022 .11
-
Span limit and parametric analysis of cable-stayed bridges
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0