지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 테크노프레스 Structural engineering and mechanics : An international journal Structural engineering and mechanics : An international journal 제63권 제5호
- 발행연도
- 2017.1
- 수록면
- 669 - 681 (13page)
이용수
초록· 키워드
오류제보하기
The design of reinforced concrete buildings must satisfy the serviceability stiffness criteria in terms of maximum lateral deflections and inter story drift in order to prevent both structural and non-structural damages. Consideration of plastic hinge formation is also important to obtain accurate failure mechanism and ultimate strength of reinforced concrete frames. In the present study, an iterative procedure has been developed for the analysis of reinforced concrete frames with cracked elements and consideration of plastic hinge formation. The ACI and probability-based effective stiffness models are used for the effective moment of inertia of cracked members. Shear deformation effect is also considered, and the variation of shear stiffness due to cracking is evaluated by reduced shear stiffness models available in the literature. The analytical procedure has been demonstrated through the application to three reinforced concrete frame examples available in the literature. It has been shown that the iterative analytical procedure can provide accurate and efficient predictions of deflections and ultimate strength of the frames studied under lateral and vertical loads. The proposed procedure is also efficient from the viewpoint of computational time and convergence rate. The developed technique was able to accurately predict the locations and sequential development of plastic hinges in frames. The results also show that shear deformation can contribute significantly to frame deflections.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Analysis of R/C frames considering cracking effect and plastic hinge formation
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Nonlinear analysis of reinforced concrete frame under lateral load
Coupled systems mechanics
2017 .01
-
Nonlinear analysis of reinforced concrete frame under lateral load
Coupled systems mechanics
2018 .01
-
고각구동 프레임 구조물의 힌지 위치에 따른 최적설계 및 해석
한국소음진동공학회논문집
2023 .04
-
Identification of plastic deformations and parameters of nonlinear single-bay frames
Smart Structures and Systems, An International Journal
2018 .01
-
Prediction of response of reinforced concrete frames exposed to fire
Advances in computational design
2016 .01
-
철골 모멘트골조로 보강된 철근콘크리트 건물의 내진성능평가
한국지진공학회 논문집
2020 .09
-
Identification of plastic deformations and parameters of nonlinear single-bay frames
Smart structures and systems
2018 .01
-
Energy absorption of fibrous self compacting reinforced concrete system
Advances in concrete construction
2016 .01
-
내부 매입형 철골조로 보강된 철근콘크리트 건물의 내진성능평가
한국지진공학회 논문집
2020 .01
-
Determination of earthquake safety of RC frame structures using an energy-based approach
Computers and Concrete, An International Journal
2017 .01
-
패널존 보강프레임을 활용한 철근콘크리트 골조의 내진성능 평가 및 개선
대한건축학회논문집
2020 .11
-
The length of plastic hinge area in the flanged reinforced concrete shear walls subjected to earthquake ground motions
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Novel Plastic Hinge Element for Seismic Performance Assessment of RC Bridge Columns with Lap Splices
International Journal of Concrete Structures and Materials
2023 .05
-
패널존 보강 프레임을 활용한 기존 철근콘크리트 골조의 내진성능 개선
대한건축학회 학술발표대회 논문집
2018 .04
-
Stiffness Degradation Induced by Seismic Loading on a RC Shear Wall
한국구조물진단유지관리공학회 논문집
2022 .06
-
Shear Crack Control for High Strength Reinforced Concrete Beams Considering the Effect of Shear-Span to Depth Ratio of Member
International Journal of Concrete Structures and Materials
2016 .12
-
Numerical analysis on the behaviour of reinforced concrete frame structures in fire
Computers and Concrete, An International Journal
2018 .01
-
Rapid prediction of long-term deflections in composite frames
Steel and Composite Structures, An International Journal
2015 .01
-
전통목구조의 골조 유형에 따른 구조성능 연구
대한건축학회 학술발표대회 논문집
2021 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0