지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2017.1
- 수록면
- 39 - 46 (8page)
이용수
초록· 키워드
오류제보하기
Finite element model updating is very effective procedure to determine the uncertainty parameters in structural model and minimize the differences between experimentally and numerically identified dynamic characteristics. This procedure can be practiced with manual and automatic model updating procedures. The manual model updating involves manual changes of geometry and analyses parameters by trial and error, guided by engineering judgement. Besides, the automated updating is performed by constructing a series of loops based on optimization procedures. This paper addresses the ambient vibration based finite element model updating of long span reinforced concrete highway bridges using manual model updating procedure. Birecik Highway Bridge located on the $81^{st}km$ of Şanliurfa-Gaziantep state highway over Firat River in Turkey is selected as a case study. The structural carrier system of the bridge consists of two main parts: Arch and Beam Compartments. In this part of the paper, the arch compartment is investigated. Three dimensional finite element model of the arch compartment of the bridge is constructed using SAP2000 software to determine the dynamic characteristics, numerically. Operational Modal Analysis method is used to extract dynamic characteristics using Enhanced Frequency Domain Decomposition method. Numerically and experimentally identified dynamic characteristics are compared with each other and finite element model of the arch compartment of the bridge is updated manually by changing some uncertain parameters such as section properties, damages, boundary conditions and material properties to reduce the difference between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of long span highway bridges. Maximum differences between the natural frequencies are reduced averagely from %49.1 to %0.6 by model updating. Also, a good harmony is found between mode shapes after finite element model updating.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Manual model updating of highway bridges under operational condition
Smart Structures and Systems, An International Journal
2017 .01
-
Structural modal identification and MCMC-based model updating by a Bayesian approach
Smart Structures and Systems, An International Journal
2019 .01
-
Finite element model updating of long-span cable-stayed bridge by Kriging surrogate model
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Bayesian model update for damage detection of a steel plate girder bridge
Smart Structures and Systems, An International Journal
2023 .01
-
FE 모델향상 기법을 이용한 세장한 아치구조의 경계조건 결정
한국소음진동공학회논문집
2021 .02
-
Anti-sparse representation for structural model updating using l∞ norm regularization
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Evolutionary-base finite element model updating and damage detection using modal testing results
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Response surface-based model updating to detect damage on reduced-scale masonry arch bridge
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Damage detection of shear buildings using frequency-change-ratio and model updating algorithm
Smart Structures and Systems, An International Journal
2019 .01
-
Experimental validation of FE model updating based on multi-objective optimization using the surrogate model
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
경계조건을 고려한 단순보의 유한요소모델개선
한국구조물진단유지관리공학회 논문집
2018 .01
-
A structural model updating method using incomplete power spectral density function and modal data
Structural engineering and mechanics : An international journal
2018 .01
-
Reconstruction of structured models using incomplete measured data
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Experimental validation of FE model updating based on multi-objective optimization using the surrogate model
Structural engineering and mechanics : An international journal
2018 .01
-
Nonlinear finite element model updating with a decentralized approach
Smart Structures and Systems, An International Journal
2019 .01
-
Neural network based numerical model updating and verification for a short span concrete culvert bridge by incorporating Monte Carlo simulations
Structural Engineering and Mechanics, An Int＇l Journal
2022 .02
-
A multi-resolution analysis based finite element model updating method for damage identification
Smart structures and systems
2015 .01
-
A FRF-based algorithm for damage detection using experimentally collected data
Structural monitoring and maintenance
2015 .01
-
Learning Update in Software-Defined Robots via Over-The-Air
대한전자공학회 학술대회
2024 .06
-
A novel multistage approach for structural model updating based on sensitivity ranking
Smart Structures and Systems, An International Journal
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0