지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2010.1
- 수록면
- 85 - 93 (9page)
이용수
초록· 키워드
오류제보하기
Japanese cedar has low density and poor mechanical performance. Manufacturing glue-laminated timber (glulam) is the best way to compensate for its poor mechanical performance. The Korean Standard (KS) confines outermost lamina of glulam to higher grade than E8, but the yield of higher than grade E8 from logs is only 6.5%. Therefore, the aim of this study is to investigate the possibility of non-Korean-Standard glulam in structural applications. Allowable stresses determined by both hand-calculation and Monte-Carlo simulation show a higher allowable stress than that of the KS-standard glulam of 6S-22B. In the Korean Standard (KS), knot characteristics are not taken into account. Japanese cedar has relatively small knots. We believe that the small knots in Japanese cedar contribute to a higher allowable stress than the KS-standard glulam would predict. The species classification of KS is required to be further subdivided into sub-species groups based on knot characteristics.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
국산 삼나무를 이용한 구조용 집성재 이용기술
목재공학(Journal of the Korean Wood Science and Technology)
2009 .01
-
Physical-Mechanical Properties of Glued Laminated Timber Made from Tropical Small-Diameter Logs Grown in Indonesia
목재공학(Journal of the Korean Wood Science and Technology)
2015 .01
-
Shear Performance of Glass Fiber Reinforced Glulam Bolted Connection
목재공학(Journal of the Korean Wood Science and Technology)
2015 .01
-
적층목질재(積層木質材)(Glulam)의 중립축(中立軸)과 강도적(强度的) 성질(性質)에 관한 연구(硏究)
목재공학(Journal of the Korean Wood Science and Technology)
1990 .01
-
Bearing Strength of Glass Fiber Reinforced Glulam Bolted Connection
목재공학(Journal of the Korean Wood Science and Technology)
2015 .01
-
집성재의 접착층수에 따른 치수안정성
목재공학(Journal of the Korean Wood Science and Technology)
2008 .01
-
Bonding Performance of Glulam Reinforced with Textile Type of Glass- and Aramid-Fiber, GFRP and CFRP
목재공학(Journal of the Korean Wood Science and Technology)
2011 .01
-
유리섬유 보강집성재 볼트 접합부 전단내력 예측
목재공학(Journal of the Korean Wood Science and Technology)
2016 .01
-
Evaluation of the Strength Properties of Glulam Connections with Inserted Steel Plates and Drift Pins
목재공학(Journal of the Korean Wood Science and Technology)
2008 .01
-
Structural Properties of Steel-glulam Composite Column
목재공학(Journal of the Korean Wood Science and Technology)
2010 .01
-
Properties of Glued Laminated Timber Made from Fast-growing Species with Mangium Tannin and Phenol Resorcinol Formaldehyde Adhesives
목재공학(Journal of the Korean Wood Science and Technology)
2019 .01
-
Characterization of Radial Stress in Curved Beams
목재공학(Journal of the Korean Wood Science and Technology)
2009 .01
-
The Tunnel Number One Knot with Bridge Number Three is a (1, 1)-knot
Kyungpook Mathematical Journal
2005 .01
-
Physical and Mechanical Properties of Glued Laminated Lumber of Pine (Pinus merkusii) and Jabon (Anthocephalus cadamba)
목재공학(Journal of the Korean Wood Science and Technology)
2018 .01
-
리기다소나무의 구조용 집성재 이용기술 개발 -낙엽송 층재와의 혼합 구성을 통한 집성재의 휨성능 향상-
목재공학(Journal of the Korean Wood Science and Technology)
2007 .01
-
AN ELEMENTARY PROOF OF THE EFFECT OF 3-MOVE ON THE JONES POLYNOMIAL
순수 및 응용수학
2018 .01
-
On the 2-bridge knots of Dunwoody (1,1)-knots
대한수학회보
2011 .01
-
낙엽송 블록접착집성재의 접착 및 휨 강도 성능
목재공학(Journal of the Korean Wood Science and Technology)
2016 .01
-
전통 매듭의 조형미와 현대적 활용실태
복식
2010 .12
-
초산비닐수지계 접착제를 사용한 탄소섬유강화플라스틱 복합집성재의 휨 성능
목재공학(Journal of the Korean Wood Science and Technology)
2009 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0