지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 21 - 24 (4page)
이용수
초록· 키워드
오류제보하기
The mechanical properties of REBCO coated conductor (CC) wires under uniaxial tension are largely determined by the thick component layers in the architecture, namely, the substrate and the stabilizer or even the reinforcement layer. Depending on device applications of the CC tapes, it is necessary to reinforce thin metallic foils externally to one-side or both sides of the CC tapes. Due to the external reinforcement of brass foils, it was found that this could increase the reversible strain limit from the Cu-stabilized CC tapes. In this study, the effects of differently hardened brass foil laminate on the electromechanical property of CC tapes were investigated under uniaxial tension loading. The tensile strain dependence of the critical current ($I_c$) was measured at 77 K and self-field. Depending on whether the $I_c$ of CC tapes were measured during loading or after unloading, a reversible strain (or stress) limit could be determined, respectively. The both-sides of the Cu-stabilized CC tapes were laminated with brass foils with different hardness, namely 1/4H, 1H and EH. From the obtained results, it showed that the yield strength of the brass laminated CC tapes with EH brass foil laminate was comparable to the one of the Cu-stabilized CC tape due to its large yield strength even though its large volume fraction. It was found that the brass foil with different hardness was mainly sensitive on the stress dependence of $I_c$, but not on the strain sensitivity due to the residual strain induced in the laminated CC tapes during unloading.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Influence of brass laminate volume fraction on electromechanical properties of externally laminated coated conductor tapes
한국초전도·저온공학회논문지
2016 .01
-
Measurement reliability of irreversible stress/strain limits in Sn-Cu double layer stabilized IBAD/RCE-DR processed GdBCO coated conductor tapes under uniaxial tension at 77 K
한국초전도·저온공학회논문지
2018 .01
-
Delamination behaviors of GdBCO CC tapes under different transverse loading conditions
한국초전도·저온공학회논문지
2015 .01
-
Characterization of electromechanical properties of Sn-Cu double layer stabilized GdBCO coated conductor tapes at 77 K
한국초전도·저온공학회논문지
2017 .01
-
Contact resistance characteristics of 2G HTS coils with metal insulation
한국초전도·저온공학회논문지
2018 .01
-
Evaluation of the delamination strengths in differently processed practical Ag-stabilized REBCO CC tapes under transverse loading
한국초전도·저온공학회논문지
2019 .01
-
Enhancement of delamination strength in Cu-stabilized coated conductor tapes through additional treatments under transverse tension at room temperature
한국초전도·저온공학회논문지
2017 .01
-
우리는 왜 CCS 필요한가?
한국신·재생에너지학회 학술대회 초록집
2015 .06
-
Enhancement of resource recovery from retired tires: Extraction of copper and zinc resources
Environmental Engineering Research
2024 .02
-
해외 CCS 법령의 기술적 해석을 통한 한국형 CCS 관리규정 제안
한국에너지기후변화학회 학술대회
2022 .10
-
국가 CCS 종합추진계획의 현황 검토 및 대규모 CCS 통합실증 추진의 과제와 정책 마련을 위한 제언
한국에너지기후변화학회 학술대회
2017 .05
-
Characteristic responses of critical current in REBCO coated conductor tapes under tensile/compressive bending strains at 77 K
한국초전도·저온공학회논문지
2018 .01
-
CCS(Carbon Capture & Storage) 비즈니스 모델 탐색
에너지기후변화학회지
2023 .06
-
해외 CCS 법령의 기술적 해석을 통한 국내 CCS 규정 제안 및 현장 적용
한국가스학회 학술대회논문집
2022 .11
-
고력 황동의 용사처리에 따른 마찰계수 변화
한국기계가공학회 춘추계학술대회 논문집
2016 .10
-
주석과 황동 용탕 드롭렛을 이용한 디스크형 응고체 제조
한국산학기술학회 논문지
2016 .08
-
글로벌 CCS Cluster 추진현황 및 한국형 클러스터 구성을 위한 해결과제
한국가스학회 학술대회논문집
2024 .05
-
영국의 CCS 비즈니스 모델 분석과 국내 적용 가능성 평가
한국에너지기후변화학회 학술대회
2022 .05
-
Optimization of wire construction from several 2G HTS tapes
한국초전도·저온공학회논문지
2019 .01
-
해외 CCS 정책적 지원제도 분석
한국에너지기후변화학회 학술대회
2022 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0