지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.1
- 수록면
- 775 - 791 (17page)
이용수
초록· 키워드
오류제보하기
The indirect tensile strengths (ITSs) of different cemented paste backfill mixes with different curing times were determined by considering crack initiation and fracture toughness concepts under different loading conditions of steel loading arcs with various contact angles, flat platens and the standard Brazilian test jaw. Because contact area of the ITS test discs developes rapidly and varies in accordance with the deformability, ITSs of curing materials were not found convenient to determine under the loading apparatus with indefinite contact angle. ITS values increasing with an increase in contact angle can be measured to be excessively high because of the high contact angles resulted from the deformable characteristics of the soft paste backfill materials. As a result of the change of deformation characteristics with the change of curing time, discs have different contact conditions causing an important disadvantage to reflect the strength change due to the curing reactions. In addition to the experimental study, finite element analyses were performed on several types of disc models under various loading conditions. As a result, a comparison between all loading conditions was made to determine the best ITSs of the cemented paste backfill materials. Both experimental and numerical analyses concluded that loading arcs with definite contact angles gives better results than those obtained with the other loading apparatus without a definite contact angle. Loading arcs with the contact angle of $15^{\circ}$ was found the most convenient loading apparatus for the typical cemented paste backfill materials, although it should be used carefully considering the failure cracks for a valid test.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Brazilian Test of Concrete Specimens Subjected to Different Loading Geometries : Review and New Insights
International Journal of Concrete Structures and Materials
2017 .06
-
An Empirical Study on CSA Cement and Backfill Material for Abandoned Mine Openings
한국에너지학회 학술발표회
2022 .04
-
Suggesting a new testing device for determination of tensile strength of concrete
Structural engineering and mechanics : An international journal
2016 .01
-
Sulfide-rich mine tailings usage for short-term support purposes: An experimental study on paste backfill barricades
Geomechanics & engineering
2015 .01
-
Effects of particle size and loading rate on the tensile failure of asphalt specimens based on a direct tensile test and particle flow code simulation
Structural Engineering and Mechanics, An Int＇l Journal
2023 .06
-
A new approach for measurement of anisotropic tensile strength of concrete
Advances in concrete construction
2015 .01
-
Modeling of damage in cement paste subject to external sulfate attack
Computers and Concrete, An International Journal
2015 .01
-
Determination of active failure surface geometry for cohesionless backfills
Geomechanics & engineering
2017 .01
-
Analysis of material dependency in an elastic - plastic contact models using contact mechanics approach
Structural engineering and mechanics : An international journal
2015 .01
-
Analysis of material dependency in an elastic - plastic contact models using contact mechanics approach
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Experimental and numerical investigation of the effect of sample shapes on point load index
Geomechanics & engineering
2017 .01
-
Investigation of Impact Resistance for Latex Modified Hardened Cement Pastes
International Journal of Railway
2018 .06
-
인공지능을 활용한 액적 이미지 경계특성에 따른 접촉각 예측 정확도 분석
대한기계학회 춘추학술대회
2022 .11
-
Study on the Contact Load of Three-Point Contact Ball Bearings under Combined Loading
한국정밀공학회 학술발표대회 논문집
2022 .10
-
Experimental and numerical simulating of the crack separation on the tensile strength of concrete
Structural engineering and mechanics : An international journal
2018 .01
-
F급 플라이 애쉬를 활용한 알칼리 활성시멘트 콘크리트의 강도특성
공학기술논문지
2016 .12
-
Strength Characteristics of Soil Cement Reinforced by Natural Hair Fiber
한국지반환경공학회 논문집
2018 .04
-
The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch
Steel and Composite Structures, An International Journal
2022 .06
-
Impact of ozone treatment on Ag-paste electrodes
대한전자공학회 학술대회
2020 .08
-
Analytical and finite element solution of a receding contact problem
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0