지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2009.1
- 수록면
- 78 - 82 (5page)
이용수
초록· 키워드
오류제보하기
We have fabricated a helmet type magnetoencephalogrphy(MEG) with a $1^{st}$ order gradiometer in vacuum to improve the signal-to-noise ratio(SNR) and the boil-off rate of liquid helium(LHe). The axial type first-order gradiometer was fabricated with a double relaxation oscillation SQUID(DROS) sensor which was directly connected with a pickup coil. The neck space of LHe dewar was made to be smaller than that of a conventional dewar, but the LHe boil-off ratio appeared to increase. To reduce the temperature of low Tc SQUID sensor and pickup coil to 9 K, a metal shield made of, such as copper, brass or aluminum, have been usually used for thermal transmission. But the metal shield exhibited high thermal noise and eddy current fluctuation. We quantified the thermal noise and the eddy current fluctuation of metal. In this experiment, we used the bobbin which was made of an alumina to wind Nb superconductive wire for pickup coil and the average noise of coil-in-vacuum type MEG system was $3.5fT/Hz^{1/2}$. Finally, we measured the auditory evoked signal to prove the reliability of coil-in-vacuum type MEG system.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
MEG Measurement Using a 40-channel SQUID System
한국초전도학회 High Temperature Superconductivity
2002 .01
-
Noise Properties of Directly-coupled Single-layer High-T$_{c}$ 2nd-order SQUID Gradiometer
한국초전도학회 High Temperature Superconductivity
2001 .01
-
First-order Wire-wound SQUID Gradiometer System Having Compact Superconductive Connection Structure between SQUID and Pickup Coil
한국초전도학회 High Temperature Superconductivity
2007 .01
-
Long-baseline Single-layer 2nd-order $High-T_c$ SQUID Gradiometer
한국초전도학회 High Temperature Superconductivity
2005 .01
-
High-$T_{c}$ 2nd-order SQUID Gradiometer for Use in Unshielded Environments
한국초전도학회 High Temperature Superconductivity
2003 .01
-
비파괴 평가용 직접결합형 1차 미분형 SQUID gradiometer
한국초전도학회 High Temperature Superconductivity
1999 .01
-
Measurement of $^1H$ NMR in Water with SQUID Gradiometer
한국초전도학회 학술대회
2009 .01
-
Measurement of Eddy-Current Noise Induced in Metals Using SQUID Gradiometer
한국초전도학회 학술대회
2009 .01
-
Nondestructive Evaluations of Crack in Metal Plates by using SQUID Gradiometer
한국초전도학회 High Temperature Superconductivity
2001 .01
-
Construction of a Whole-Head Magnetoencephalography System with Gradiometers Installed in the Vacuum Space
한국초전도학회 학술대회
2009 .01
-
Localization of Epilepsy Spikes With a 40-channel SQUID Gradiometer System
한국초전도학회 High Temperature Superconductivity
2003 .01
-
Design and Construction of an HTS DC SQUID Electronic Gradiometer NDE system
Progress in superconductivity
2000 .01
-
Noise Properties of Directly-coupled Single-layer High-Tc 2nd-order SQUID Gradiometer
Progress in superconductivity
2002 .01
-
Low-Frequency Noise Properties in Single Layer thin Film High-$T_c$ SQUID Gradiometers
한국초전도학회 High Temperature Superconductivity
2002 .01
-
고온 초전도 Electronic Gradiometer의 제작과 NDE system 에의 응용
한국초전도학회 High Temperature Superconductivity
1999 .01
-
Characteristics of Pb Superconductive Shield for a Whole Head MEG System
한국초전도학회 학술대회
2009 .01
-
심자도 측정을 위한 SQUID 센서 기술의 개발 현황
Progress in superconductivity
2011 .01
-
SQUID와 검출코일의 초전도 결합방식이 개선된 1차 권선형 미분계 시스템
Progress in superconductivity
2007 .01
-
헬멧형 뇌자도 장치의 센서 교정
Progress in superconductivity
2010 .01
-
Influence of Sensor Noise on the Localization Error in Multichannel SQUID Gradiometer System
한국초전도학회 High Temperature Superconductivity
2003 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0